Question about 2007 Cadillac DTS Sedan

1 Answer

Experiencing brake/rotor problems when braking, severe at higher speeds; started at 8,000 miles; dealer checked but OK; pulsating/shimmy???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Find another dealer, your rotors are warped. You "may" be a left foot braker.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Moderate scraping noise coming from my right front tire


a shimmy condition indicates it needs a wheel alignment
best take it to an accredited front end specialist shop for a proper diagnosis of the problem

Jun 22, 2017 | Cars & Trucks

1 Answer

Hard pulsating shimmy when going 65 to 70 on highway


Warped rotors usually causes this due to excessive braking. Could be bad belt in tire also, or possibly a bent or cracked rim.

Jan 18, 2013 | 2006 Chrysler PT Cruiser

1 Answer

Front brakes shimmy or pulsate


Sound like warped rotors. Has the car been siting for while (eg at an airport ). Does the shimmy through the steering wheel or just the brake pedal? Make sure the pads are free in calipier, calipier slides are prone to sticking make sur there sliding ok. And pistons are going back ok hope this year helps

Aug 12, 2012 | 2000 Toyota Sienna

1 Answer

When applying the brakes, the whole car shimmys. replaced rear rotors , turned front rotors , and replaced all the pads


I think you should get the Tierod ends checked. When you get a Front-end alignment, the mechanic will check them. Although you turned the front Rotors, when you start Braking the front tires can wander differently than when they freewheel.

Sometimes you can get a rust problem on the Rotors that were just made shiny. Moisture on the pads imprints a rust blotch on the Rotor and they grab at the rust until the rust wears down. Then they are ok.

When the rear Rotors were replaced check your bill and see if the Emergency brake shoes were changed. The E brakes should have been adjusted when the Rotors were replaced. The Shimmy you describe can also be the ABS working. The ABS is a pulsating Brake action.

Get your front-end checked first, then as the mechanic road tests it when the Alignment is complete, he can judge the brakes.,

Sep 10, 2010 | 2004 Mercury Grand Marquis

2 Answers

I have a '03 Monte Carlo SS and I replaced the rotors at 76k miles and the rotors need replaced again at 89k miles. It shouldn't need rotors again so soon should it?


I wouldn't think you'd need them again that soon. Unless you have some calipers sticking and causing the rotors to get hot and warp. Do you have a shimmy when applying the brakes at higher speeds?

May 13, 2010 | 2003 Chevrolet Monte Carlo

3 Answers

1997 Grand Prix GT with 134,000 mi has a slight vibration/shimmy felt at the steering wheel at speeds above 65 mph. All new struts fwd and aft, alignment and new wheels and tires have been replaced in the...


If your tires were not properly balanced then it will cause that. Also, if your rotors are warped then icould cause this to happen. YOu would also notice it when braking if rotors are warped.

Oct 20, 2009 | Pontiac Grand Prix Cars & Trucks

4 Answers

Steering wheel vibration at 65 mpr after I had master brake cylinder replaced. I have to pull off to side of road and stop car then start up again and problem stops. Can feel vibration in brake pedal when...


check balance of tires; if ok, have rotors refinished or replaced; most likely warped rotors if you can feel it in the brake pedal when braking

Oct 07, 2009 | 2004 Toyota Solara

2 Answers

Steering wheel shimmys at speeds 35 and up just changed rotors and pads no play in new wheel bearings doesnt shimmy when i brake though. any help would help greatly thanks


If it shimmies with the brakes applied, it's a rotor problem....but like you say, it shimmies just at a certain speed with no brakes applied, check tires for out-of-roundness. If they look ok, you are looking at a balance problem with the tires.

Oct 01, 2009 | 2000 Ford Ranger SuperCab

3 Answers

My car shakes after applying brakes at high speeds of 60 to 70 MPH on my 2001 / IS300 lexus. I recently had the rotors turned and put on new break pads before this problem really became noticable. I...


Well even though you had the rotors turned, they still could be warped and causing the car to shake at a high rate of speed when the brakes are applied. My suggestion is to replace the rotors asap.

Apr 20, 2009 | 2001 Lexus IS 300

Not finding what you are looking for?
2007 Cadillac DTS Sedan Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...