Question about 2005 Chrysler Town & Country

1 Answer

I want to change the filter on my van

How do i remove the a/c filter on my 2003 t&c chrysler

Posted by on

  • billk6 Jul 30, 2009

    i can not find access. i have dual controls but not eletronic

  • billk6 Jul 30, 2009

    does the glove box need to be removed?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Only the vans with dual zone temp control ( meaning driverside & passengerside temp control), or digital temp readout have the filters. The part# you need if applicable to your vehicle is 82205905 $41.70 your local dealer should have these in stock. It will be located on the passengerside of the vehicle behind the dash by the glovebox area, there will be a small removable access door. That you should find to get to it. A small pain to get to. Let me know how this turns out.


Benjamin

Posted on Jul 30, 2009

  • Benjamin Patri
    Benjamin Patri Jul 30, 2009

    Yes, you will need to remove much of the dashboard to get to it. As I said, it is a pain to get to

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Chrysler town & country limited


First try and change the fuel filter. this also happened on a van i worked on. I cahnged the filter and it runs fine now.

Nov 16, 2011 | 2003 Chrysler Town & Country

2 Answers

How do I relieve fuel line pressure before changing fuel filter?


remove the pump fuse, start the car. fuel pressure relieved.

Mar 18, 2010 | 1997 Chrysler Town & Country

1 Answer

Need to change the rear window wiper blade on a 2003 tOWN & cOUNTRY CHRYSLER VAN


Take it to your local Auto Zone-we change them for you if you are buying the blades from us. You MIGHT find someone to do it for you even if you did not buy them at AZ.

Mar 10, 2010 | 2003 Chrysler Town & Country

2 Answers

I have a Chrysler 2003 mini van town and country, with 74,000 miles.Since when it was at 70,000, it started stopping at every stop signal,in slow motion when the engine is started. I got changed the fuel...


This happened to me. The valve that controls the air intake gets stuck which stalls the motor. I removed the air intake hose and wiped it clean using Acetone (nail polish remover). Its been running perfectly ever since....

Feb 11, 2010 | 2003 Chrysler Town & Country

2 Answers

2003 Dodge Town and Country Van, 3.8 V6. Where is the engine cooling fan relay located? I replaced the blown 40 amp fuse, tested both fans, the are OK. Need to locate relay!


Down by the bottom of the radiator. pass side. on the frame/rad support. You probly have to remove front splash shield to get to it. I have never had to remove or change one.

Jan 23, 2010 | 2003 Chrysler Town & Country

1 Answer

How to remove, and install a brake light switch in a 2003 chrysler town & country van


you need to lay on your back and follow the brake pedal up so far and you will see the brake switch attached to it,you will need to pull out a large hair pin clip,and wiggle the master cylinder rod and the switch off together,

Jan 11, 2010 | 2003 Chrysler Town & Country

1 Answer

2003 town & country mini van - won't start, even when you hold the gas to the floor, makes popping sound


you have a bad injector or a plug fuel filter or a bad fuel pump check the fuel pump relay first also give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your van wish you the best of luck Michigan Man.

Jan 04, 2010 | 2003 Chrysler Town & Country

2 Answers

Where is the fuel filter on my 1998 Chrysler Town & Country mini van?


on top of the fuel tank, it is a line and filter assembly.

Jul 17, 2009 | 1998 Chrysler Town & Country

1 Answer

How do I change the transmission fluid in a 1997 chrysler town & country?


remove the trans pan this is the one facing down and towards the front dont pull end cover or diff cover. filter is under it install new filter and reinstall pan refill to correct level. keep in mind that changing the fluid this way only gets out about half the fluid because there is no way to drain the torque conveter also dont try to change the fluid when van is hot let me know if you need anything else

Jun 03, 2009 | 1997 Chrysler Town & Country

1 Answer

Cabin air filter 2003 T&C Van 3.3L


it under the hood on the pass sideunder the wiper assy

Mar 28, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...