Question about 2001 Chevrolet Impala

1 Answer

THE REMOTE NOR THSWITCH ON THE DRIVERS SIDE DOOR WILL UNLOCK DOORS.THE REMOTE WILL UNLOCK TRUNK & TURN ON LIGHTS.THE "PASSLOCK SYSTEM" LIGHT STAYS ON ALL THE TIME . FUSES ARE O K.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 355 Answers

You can bypass the security system entirely. There is a great write-up here http://newrockies.ca. That was the only way to save my Park Avenue.

Posted on Jun 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm won't turn off


the valet key doesnt have a transponder chip in it, so it will allow physical turning of keyways and operations, but will not disable the alarm and often wont disable the immobilizer.

sorry to say i think you will need to get an autolocksmith , or main dealer to get you a functioning key with transponder chip mapped to your cars rfid system that will allow alarm to be enabled /disabled

Mar 23, 2017 | 2000 Volkswagen Jetta TDI

1 Answer

How do i manually release the rear door on a ssab 9-3 2003 as the door module has failed


Trunk Lock After Closing
--------------------------
Desc.: What happens to the trunk lock when closing it.

Settings:
Yes: Automatically lock Boot on closing
No: Boot can be reopened using micro switch button located on the trunk/boot

* Trunk Lock After Drive Off
----------------------------
Desc.: Should the trunk be locked at drive off or after 30 sec.?

Settings:
Yes: Trunk/Boot will automatically lock when vehicle increases speed
No: Trunk/Boot will remain closed, however will be in the unlocked
condition if No was selected in the previous option.

* Door & Trunk Unlock at Key Out
--------------------------------
Desc.: When the is removed from the center console should door/trunk
be unlocked?

Settings:
Yes: All Doors & Trunk/Boot will Unlock when the Key is removed from
the Ignition Switch If Driver frequently locked all Doors when
driving
this feature would be beneficial.
No: Doors and Boot will remain in the same condition as they were
prior
to Key removal

* TSL Locking Logic (Theft Security Locking/Deadlock)
-------------------
Settings:
TSL at first Press: Default Setting. All Doors will lock in Deadlock
Mode
TSL at Second Press: All Doors will lock in Deadlock mode at the second
press of the Remote.

* Lock /Unlock Acknowledge
--------------------------
Settings:
None : No acknowledge will be visible
Indicators: Indicators will blink as acknowledge

* Follow Me Home Function
-------------------------
Settings:
Tail Light: When selected Tail Lights will be illuminated
Back Up Light: When Selected Reverse Light will be activated


Tech 2 Body Exterior Lighting & Horn
====================================

* High Beam Follow me home Active Time
--------------------------------------
Desc.: Follow Me Home Active Time can be adjusted between 0- 10 minutes

Settings:
This Feature can be turned on or Off .Yes / No can be selected.
Low Beam Automatic / Low Beam also in Position 0 (light switch)
Yes / No
Follow Me Home Active Time
- Daytime Driving Lights can be activated

* Parking Lights
----------------

Settings:
Act as Lead Me To the Car Light.

* Park Light On Reminder
------------------------
Settings:
On / Off
If Ignition is turned Off and the parking lights are active, Driver will
be warned if set to on.

* Show Trailer Light Outage
Desc.: REC will detect blown trailer light and display on SID

Settings:
Yes or No

* Trailer Light / Fog Light off
-------------------------------

Settings:
Yes: Fog Light Rear will be disabled When Trailer is connected Yes
No

* Horn Lock Unlock Acknowledge
------------------------------
Settings:
On: Horn will honk when car is locked
Off: Horn will not honk if car is locked


Tech 2 Body Locking
===================

* Panic Alarm Activation (Vehicles fitted with /Alarm only)
-----------------------------------------------------------
- Panic Button / Locking Switch
Central Locking Switch Driver /Passenger

Settings:
- Panic Button on Remote and locking switch inside vehicle will
activate alarm
- Panic Button will activate Alarm only
- Locking Switch inside vehicle (driver /passenger will activate
alarm only
- No Panic Alarm function required.

* Unlock Logic
--------------
Settings:
All at first press : All Doors will open & Fuel Lid will unlock if the
Driver or Passenger Door Switch is activated
Driver Door & Fuel Lid at first press : Only the drivers Door will unlock
& Fuel Lid will unlock when door
switch is activated

* Remote unlocking One Press
----------------------------
Settings:
All at first press: All Doors will open & Fuel Lid will unlock if the
Remote is pressed
Driver door & Fuel Lid at first press: Only the drivers Door will unlock &
Fuel Lid will unlock when the Remote
is pressed

Dec 17, 2010 | 2003 Saab 9-3

1 Answer

A few days a go my locks on my 2002 saturn started fluttering and making clicking sounds. I can only unlock my car with the key now and all the locks have to be unlocked and locked manually. Then a few...


Do you or your husban know how to trouble shoot automotive electrical systems , using a wiring diagram and a DVOM - digital volt ohm meter ? Do you know how to trouble shoot electronic control modules an circuitry ? The BCM - body control module controls the power locks , anti-theft system . The first step in diagnosing problems like this involve hooking of a scan tool that can pull BCM codes . No auto parts store can check these codes .
DOOR LOCKING/UNLOCKING
Door locking/unlocking, by remote keyless entry (RKE) or driver/all door lock switches, is controlled through the BCM.
When a driver door unlock has been requested, the BCM switches circuit 694 to battery voltage. This energizes the driver door unlock relay which supplies power to the driver door lock motor. Grounding is achieved through the closed contacts of the all-door lock relay. Grounding is also achieved through the windings of the all-door lock motors and the all-door unlock relay.
When an all-door unlock has been requested, the BCM switches circuit 194 to battery voltage. This energizes the door unlock relay which supplies power to the all-door lock motors. Grounding is achieved through the closed contacts of the door lock relay. Grounding is also achieved through the winding of the driver door lock motor and the driver door unlock relay.
When an all-door lock has been requested, the BCM switches circuit 195 to battery voltage. This energizes the door lock relay which supplies power to all-door lock motors. Grounding is achieved through the closed contacts of the door unlock relay and the BCM.
Lock/Unlock power application is limited by the BCM to 7 seconds to protect lock motors.

SECURITY SYSTEM
The passlock sensor is powered by circuit 1459. The passlock sensor is grounded by circuit 1835. Passlock sensor data is supplied to the BCM by circuit 1836.
The passlock sensor data supplied to the BCM is in the form of V-codes or voltage codes. When the proper ignition key is turned in the ignition switch, the correct V-code is supplied to the BCM. The BCM responds by sending a serial data password to the engine controller allowing the engine to run.
Under a tamper condition, a specific V-code is supplied to the BCM. The BCM will send a class II message to the PCM disabling the fuel injectors.


Electric Testing Techniques You Need to Know

ECM Inputs and Outputs Diagnosis

http://www.bbbind.com/free_tsb.html free wiring diagrams ! Enter vehicle info. year , make , model an engine size . Under system click on Body & Accessories , then under subsystem click on Body controls .Then click on the search button , then the blue link . You will see all inputs and outputs from the BCM . Check B+ voltage at the door lock switches . Check door lock fuse 20amp . Check door lock an unlock relays .


https://en.wikipedia.org/wiki/Body_control_module

Also test the starting circuit !
How to voltage drop test starter motor circuit


May 10, 2017 | 2002 Saturn S-Series

1 Answer

I have a 1997 infiniti I30, one day all of a sudden when I came out of a grocery store I turned the key and absoloutely nothing happened. My lights can come on inside the car but, my power windows wont...


This is from Ken on CarPros:
Here is the way to reset the security system.

https://www.2carpros.com/articles/how-to-reset-a-security-system

Here is the systems descriptions

There are 2 security system, namely anti-theft and immobilizer.

Here are the 2 systems.

DESCRIPTION & OPERATION
Anti-theft system is controlled by Body Control Module (BCM). BCM receives signals from hood switch, trunk switch, door switches and Local Control Modules (LCMs). There are 5 LCMs located throughout vehicle.

To set anti-theft system in armed mode, remove ignition key, close all doors, trunk and hood. Lock doors using key or remote controller. The SECURITY light will illuminate for 30 seconds, then flash in 2.4 second intervals, indicating system is in armed mode.

To cancel armed mode, unlock and open any door or trunk lid using key or remote controller. SECURITY light will flash every second, indicating system is disarmed.

Alarm will activate (horn sounds, headlights flash and starter circuit is disabled) if any of the following conditions occur while system is in armed mode:

Engine hood or trunk lid is opened using the hood or trunk lid release.
Door(s) is unlocked without key or remote controller.
Tampering with any door/trunk lid key cylinders.
To deactivate anti-theft system, unlock door or trunk using key or remote controller.

If it is the immobilizer that is preventing the engine from being started, ensure you have the correct key and the transponder is intact. Quite often keys are dropped and if it breaks open, the internals would scatter all over. When this occurs, there is a tendency for the transponder to be lost.

Please let us know happens so it will help others.

Best, Ken
I hope that helps you out!

Mar 31, 2017 | 1997 Infiniti.5 J30

1 Answer

My battery goes dead on my 1996 Lincoln Mark VIII overnight. I found that the lights come on by themself after I park the car. There is a clicking sound coming from the security module in the trunk when I...


security module in the trunk ???? There is no security module in the trunk . What light's come on by them self ? Park lamps , headlamps , brake lamps ,turn signals etc.... The module for anti-theft is under the right hand side of the dash . The remote keyless entry module is located in the trunk. Is this the part you hear clicking in ?
Door Lock Control Processor, Electronic NOTE: The electronic door lock control system will not function when the ignition switch is in the RUN or ACC position.
The electronic door lock control processor:
  • is located on the LH side of the luggage compartment.
  • contains a radio receiver that receives a signal from the keyless entry remote transmitter (15K601) through electronic door lock control processor antenna, and sends the appropriate command to the power door locks, the horn relay, the indicator flasher, or the anti-theft warning system.
  • is equipped with a battery backup which holds the programmed code in memory in the event the vehicle battery is disconnected.
    • Doors Do Not Lock or Unlock Using Keyless Entry Remote Transmitter
    • Circuit.
    • Electronic door lock control processor.
    • Keyless entry remote transmitter.
    • GO to Pinpoint Test B .

Aug 17, 2017 | Lincoln Mark VIII Cars & Trucks

1 Answer

I bought a new Keyless remote for a 2007 Forester from a Subaru Dealer to replace an original one that went bad after 2 years. I have followed the directions in the owner's manual to program it, but can't...


IMPREZA: 2005, 2006, 2007 and
FORESTER: 2005, 2006, 2007, 2008
Check for Immobilizer key on Forester XT models only.
information is always subject to change and correction imp05keylessremote1.jpg
new remote for 2005 Imprezas.
This is not the same remote as the 05 Legacy/Outback remote which also has truck/gate release on the front and a red panic button on the back.
Lock: press Lock button for 2 seconds or so to lock car, and arm optional security system. The car with chirp once and turn signals flash for locked, 5 short chirps and signal flashes if any door is not fully closed. The dome light goes on for 15 seconds and ignition key ring (if present) will light for 30 seconds when unlocked.
Unlock: press unlock one time for driver's door, press again within 5 seconds to unlock all doors inkling rear gate (wagon). The system does not open the trunk.
Panic mode: press and hold lock button for approx. 3-4 seconds to activate Panic mode. I panic model the horn honks and turn signals flash until either the lock or unlock button is pushed again.
Finder mode: Press lock button 3 times within 5 seconds to activate Vehicle Finder mode. The horn will honk once and the turn signals will flash 3 times
Distance: works within approx. 30 feet depending on battery strength, nearby concrete walls and etc.
Audible Chirp On-Off: the system will chirp when locked or unlocked. To turn OFF the chirps, unlock the door and then push both lock and unlock buttons at the exact same time for 2+ seconds. There will be 2 chirps indicating the the audible is off. To turn the chirp back on, repeat the process and the system will chirp one time when it is back on.
Battery: as the battery ages it will only work as you get closer to the car. When a battery is replaced, the transmitter must be re-synchronized with the Keyless control unit. To synchronize, press the lock or unlock button 6 times.
Programming: 4 codes may be programmed.
Sit in driver's seat and unlock all doors. Open and close the driver's door
Turn the ignition key from LOCK to ON position 10 times within 15 seconds. Be sure to stop at both lock and on. The horn will HONK once to indicate transmitter programming mode is activated. Leave key in LOCK position and don't remove it from ignition.
You now have 45 seconds to complete the programming as below.
Open and close driver's door again.
Push either lock or unlock button on the remote you want to program. The horn will honk 2 times when successful.
To continue and program other remotes at the same time: open and close the driver's door and push lock or unlock on the remote. The driver's door must be opened and closed between each remote you want to program.
Done programming? remove the key from the ignition and the horn will honk 3 times.
DELETE old codes? Reprogram 4 times, it will overwrite old codes.
Alarm Security System: optional on all models. When locked there is one chirp (can be turned off, see above), the turn signals will flash and the red 'security' light will start to flash once every 2 seconds except for STi which flashes twice every 2 seconds.
There will be 5 chirps if a door, hood, and trunk or gate is not fully closed
You can also arm the system by using the power lock button on the driver or passenger door as you get out of the car and then closing the door behind you.
Disarm the system: push unlock for 2 seconds
Lost remote, alarm activated? When you can't use a remote to turn off the system: open the door with a key or try to start the car and the horn will start to honk. Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car. It's simple!
VALET mode: To set valet mode or just to disable the security alarm system: 1. unlock all doors 2. physically open the driver's door 3. hold the UNLOCK button on remote for 2+ seconds. The red 'security' light will then flash 2 times a second until the car is turned on.
System has been Tripped (except for STi): if you unlock the door with the remote and it chirps the signal light flash 4 times, the system has been triggered;
Identification mode: To find out what happened and why the system was triggered:
Open and drivers door, leave it open. Turn ignition key from LOCK to ON 2 times and then leave in LOCK position.
Tripped code: 1 security light flash: a door has been opened, 3 flashes when the impact sensor was triggered, 4 flashes when the ignition was messed with or battery disconnected

Nov 19, 2009 | 2007 Subaru Forester 2.5X L.L. Bean...

1 Answer

Installing a new radio, how do I remove the old radio?


Here's the basics..Same as a grand am if you've done one of those..Let me know if you need any other info.

-----------------------------------------
Driver underdash. Harness going into firewall. (If there's two harnesses running parallel to each other they will be in the harness that is higher up)

Constant: Red (+)
Ignition: Pink (+)
Starter: Yellow (+)
Heat/AC: Orange (+)
Horn: Black (-)
Parking Lights: Brown (+)
-----------------------------------------
Ignition Switch. Remove radio to access

Ignition 2: Dark Green
Passlock 2: Yellow and Black Wires
-----------------------------------------
Driver Kick: Harness Coming In From Driver Door Boot

Trunk Release: Black/White (-)
Lock/Unlock: White (-) (Negative pulse to lock, unlock needs a 1,500 ohm resistor)
Dome Sup: Green/Black (-)
Door Trigger 1: Green/Black (-)

-----------------------------------------
Pass Kick: Harness Coming In From Driver Door Boot

Door Trigger 2: Light Blue (-)


thats the wiring diagram for you

to remove the unit Disconnect cables from the rear & pull off front plate. (should pop off). Flat head driver needed.

Oct 27, 2009 | 2003 Oldsmobile Alero

4 Answers

Passlock


turn key all the way on (not to start) let set for 1 hur cycle key and try it.

Jul 20, 2009 | 1999 GMC Jimmy

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...