Question about 2000 Ford Focus

1 Answer

Where to add transmission fluid in a 2000 Ford Focus

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Hi and Welcome to fixya.

First of all you have to dipsticks one for oil and the other for Automatic fluid pull this one out and this is where you top up your Auto fluid, start the engine and let it idle in park position first check your level on the dipstick if low top up but don't go mad with topping up just a little bit at the time you don't want to over fill it,once done this replace dipstick and turn off engine,hope this helps you.
Best regards.
George...

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you add automatic transmission fluid in 2000 ford futura au


in a plug on the side of the gearbox under the car (16mm),running in "D" with the engine running at 1000 rpm with the box warm but not hot,pump it in until it runs out of the plug, a pit,hoist or solid ramps will be needed for this as well as 2 people

Oct 16, 2014 | 1999 Ford Falcon

1 Answer

Need to replace a wheel speed sensor in my 2000 ford focus on the back passenger side


There's a single set screw holding the sensor on the side.
Disconnect the electrical plug first.
Caution: With the sensor out, transmission fluid will leak out. Either drain the transmission fluid before or use a preselected hole plug.
Remove the set screw. Gently pull out the sensor from the transmission.

Apr 12, 2014 | 2000 Ford Focus

1 Answer

Where do I add manual transmission fluid to my 2003 ford focus 2.0 SOHC manual transmission? I need a diagram if possible.


On the transmission from underneath you should see a bolt, you will have to remove it to put in the proper amount. Go to autozone.com it may have a diagram for it's location.

Oct 14, 2013 | 2003 Ford Focus

1 Answer

My 2000 ford focus se is leaking brake fluid through the transmission would I have to replace clutch?


if it leaking brake fluid there, it would be your throw-out bearing! would also be the perfect time to replace the clutch! also, brake fluid will eat away the clutch disc lining!

Mar 26, 2012 | 2000 Ford Focus

1 Answer

Hi,got a leak in my steering column and I'm nearly out of fluid,which fluid do I need to get?


I am guessing that we are talking power steering. If this is correct then you will need to add type MA which is simply a dextron type transmission fluid for your power steering.. Best of Luck in fixing the leak..

Aug 19, 2011 | 2000 Ford Focus

1 Answer

Where to add transmission fluid 2000 ford escort


Where to put transmission fluid in a 2000 Ford escort

Apr 04, 2009 | 2000 Ford Escort

2 Answers

Where do I add new transmission fluid to a 2005 ford focus?


same place the dipstick goes that you use to check the level... use a funnel

Robert

Jan 12, 2009 | 2005 Ford Focus

1 Answer

What gear oil do i use in a 2000 ford focus 1.8tdi manual, its the one that you lift up a trigger to select reverse? thanks


MERCON (R) Multi-Purpose Automatic Transmission Fluid XT-2-QDX

CAUTION:
Using a transmission fluid that indicates a dual usage MERCON and MERCON V in a transmission application requiring MERCON, may cause internal transmission damage. The use of any fluid other than the recommended fluid may cause transmission damage. Some fluid labels may indicate dual usage such as MERCON and MERCON V. These dual-usage fluids are not to be used in transmissions that use only the MERCON type fluid. These dual-usage fluids may be used in transmissions that require MERCON V use.

Dec 03, 2008 | 2000 Ford Focus

1 Answer

Manual transmission


The clutch operates dry. Your assumption that it would slip with oil in there is a good one.

Aug 04, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

787 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...