Question about 1992 Chevrolet Corvette

2 Answers

1992 Lt1 corvette will not start

Turn key nothing happens. new battery, fuel pump, fuel filter

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

If its a six speed it could be the clutch start switch

Posted on Jan 10, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 359 Answers

Bang the starter with a hammer, the solenoid may be sticking, if it works get a new starter, if it doesn't check the connections at the starter

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

New starter and battery sometimes starts fine sometimes turn the key and nothing keep trying and it starts right up what is it pmease


Sounds like your fuel pump is about to fail. Have pressure check run on fuel pump. If low then replace.

Sep 20, 2015 | Cars & Trucks

2 Answers

My 1992 Chevy corvette lt1 is not starting is getting fuel to the jet by the intake what do i do?


This vehicle should be fuel injected and therefore have no jets. If you are referring to a schrader valve on the fuel rail having fuel then maybe I can offer some help.You need to pull a spark plug wire off and see if there is any spark from the wire if you are sure there is fuel supply.Check for spark and let me know

May 22, 2015 | 1992 Chevrolet Corvette

1 Answer

What arm the specs for 95 camaro lt1 350


Block and Basics
Displacement: 350 cubic inches, 5733 cubic centimeters, 5.7 liters
Block Material: Cast Iron
Main Bearings: 2-Bolt Centers and Ends (The Corvette LT1/LT4 had 4-bolt mains)
Stroke: 3.48"
Bore: 4.00"
Compression Ratio: 10.4:1
Combustion Chambers: 54 cubic centimeters
Factory Redline Rating: 5700 Rotations Per Minute

Bottom End
Piston Material: (10159437) Eutectic Aluminum/Silicon Alloy
Connecting Rod Material: (10108688) Powdered Metal
Crankshaft Material: (12556307) Cast Iron

Top End and Valvetrain
Cylinder Heads: (10168448) Cast Aluminum, 2 valves per cylinder/16 valves total, ~212 CFM flow (Impala SS and Caprice heads were made of cast iron*)
Valve Diameter: (intake- 10241743, exhaust- 12550909) 1.94 intake, 1.50 exhaust
Valve Overlap: 41*
Valvesprings: (10206040) 85 lbs, seated
Camshaft Specs (12551705): 205/207 duration @ 50*, .447/.459" lift, 117 Lobe Seperation Angle
Rocker Arms: (10089648) 1.5:1 Stamped Steel
Timing Chain: (10128485) Powdered metal link

Intake and Fuel Delivery
Fuel Delivery: Electronic Fuel Injection, sequential port
Injector Size: (17124248) 3.0gps, 22lbs/hr speed density (1992-1993), 24lbs/hr mass airflow (1994-1997)
Throttle Body: 48 millimeter twin butterfly
Intake Manifold: (12552137) Aluminum

Factory Power Ratings
92-96 LT1 Corvette: 300bhp, 330lb-ft
1996 LT4 Corvette: 330bhp, 340lb-ft
1992 LT5 Corvette: 375bhp, 370lb-ft
93-95 LT5 Corvette: 405bhp, 385lb-ft
93-95 LT1 F-Body: 275bhp, 325lb-ft
96-97 LT1 F-Body: 285bhp, 325lb-ft
96-97 WS6/SS: 305bhp, 335lb-ft
93-97 Firehawks: 315bhp, 340lb-ft

Factory LTX Camshaft Specifications**:
1992 Y-body: 205/207 0.451/0.450 lift 117 LSA
1993-1995 Y-body, F-body: 202/207 0.450/0.460 lift 116 LSA
1994-1996 B-bodies (including L99 4.3L): 191/196 0.418/0.430 lift 111 LSA
1996 Y-body, 1996-1997 F-body: 200/207 0.447/0.459 lift 117 LSA
1996 Y-body, F-body LT4: 203/210 0.476/0.479 lift 115 LSA


hope this helps

Mar 04, 2015 | Cars & Trucks

1 Answer

1992 Honda accord wont start and stay running.


MAKE YOU HEAR FUEL PUMP RUNNING WHEN TURN ON IGNITION KEY. IF NOT CHECK FUSE AND RELAY.IF YOU HEAR PUMP RUNNING. CHECK FUEL PRESSURE.IT SHOULD 36 TO 40 PSI.IF NOT REPLACE FUEL FILTER.IF FUEL PRESSURE IS STILL LOW FUEL PUMP IS BAD.

Aug 25, 2009 | 1992 Honda Accord

2 Answers

Car will not start


If the starter is good, a bad ignition module or failed fuel pump will produce similar symptoms, i.e. no cranking, nothing happening when you turn the key. Ignition module sits under the distributor cap and is about the size and shape of a cassette tape with 2 female plugs and one male plug. Quick way to check the fuel pump is to put the car in a quiet place like inside the garage. Find a quiet friend to sit behind the wheel and turn the key so the dash lights come on, DO NOT TURN THE KEY FULLY LIKE YOU'RE TRYING TO START. You get down on the ground and listen near the gas tank for the quiet hum of the fuel pump that tells you it is working.

May 12, 2009 | 1992 Buick Roadmaster

1 Answer

Rough Idle after winter in storage - 92 C4 convertible


Try a popular fuel stabilizer like Seafoam sold just about anywhere.

May 08, 2009 | 1992 Chevrolet Corvette

3 Answers

1992 Corvette won't start




Disconnect the + wire Coils Take #1 Spark Plug Out Get a helper Use Compression Guage if not Available, Just put your finger over the Spark Plug Hole, have help BUMP the Starter over till You can Feel The Compression at your finger you need #1 at TOP DEAD CENTER on its Compression STROKE Fine tune it by using a STRAW in the Plug Hole to feel the PISTON Move UP To VERY TOP Dead center----------------------------------This is Tricky but don't Loose these Instructions------- If you have the OPTI_SPARK Ignition System My Books show all about it but Nothing on the Timing "MARK" as this is the step I Stoped at Above.. Coil Pack Ignition Will Have a Timing MARK On the Lower Harmonic Balancer. Point Being if Mark is NOT on the Degree Indicator It has JUMPED TIMING<< Surly on a Coil Pack Ignition System BUT
-------- The Opti Spark system if there is NO Timing Mark to Go by I Would Suggest Breaking Down and Letting A DEALER Handle it Unless You Can RULE that it HAS JUMPED TIME------------------------------------------------------------------------I Truly Hope I've shed some Light on Your Delima and this Leads you to a Smooth running Chevy. PLEASE don't forget to Rate Me ------------------------------------P.S. The Opti - Spark System Has A BAD REPUTATION Just FYI Recall - Opti-Spark Distribtor, Stall/No Start, Code 16 Notes
9227chevy01
Number:
92C11
Section:
6E
Date:
Feb., 1992
Subject:
PRODUCT EMISSION CAMPAIGN 92C11 - Opti-SPARK DISTRIBUTOR
Model and Year:
1992 CHEVROLET CORVETTE W/ LT1 ENGINE
To:
All Chevrolet Dealers

Jan 16, 2009 | 1992 Chevrolet Corvette

2 Answers

1992 Corvette cranks over but will not start.


Your Starter Brushes are worn down to far to Kick her Over. Replace that Starter and you Should be Good. Let me Know!

Jan 16, 2009 | 1992 Chevrolet Corvette

Not finding what you are looking for?
1992 Chevrolet Corvette Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...