Question about 2005 Hummer H2

1 Answer

Front hub bearing changed now traction keeps coming on.

Front hub bearing changed one side only. Now the service the brakes and the traction control come on everytime above 24 mph. Nothing wrong with brakes, maybe some how sensor went bad?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

It seems that either the bearing is not properly fitted leading to false alarm being generated(maybe the bearings are too tight) such that the brake pads are not equidistant compared to the other side wheel. Well the thumb rule is to replace both since they are the front wheels. Try refitting the bearing but my instinct tells me to change the other wheels bearing too and get the brakes reset with the help of computer guided sensor settings checking & adjustments as required. This will definitely help but don't forget to recalibrate the sensors with the help of a PC at the service station. Its IMP......sodeep

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

On my 2012 Impala on take of I'm hearing a grinding scrapping noise also a temporary warning on service stability and brake asst also a traction light I have had both of my front hub's changed


You say you had the front hubs replaced do you mean the brake rotors.
This sounds like a wheel bearing problem it would make a noise and also as the bearing degrades the wheel wil start to wobble .This would effict brakes traction and stibelty sensors .Who replaced the parts they would be responsable if you had a warrenty
Jack the vehicle up front 1 wheel at a time grap the tire top and bottom it should not move in and out at all if so its a bearing the whole system rides on the bearings .
This is a system so check rotor pads calipers sensors it all has to work together

Apr 05, 2015 | 2012 Chevrolet Impala

1 Answer

Traction control keeps activating


When the light keeps illuminating it recieves it message from the EBCM (electronic brake control module) or the ABS system,Make sure you have all the same tire size and are properly inflated,just to let you know GM has known problems with the front ABS unit,and the solution is to replace front hub and bearing. Bulletin No. 03-05-25-004A

Nov 12, 2012 | 2002 Oldsmobile Silhouette

1 Answer

Service engine, antilock brake, and trac off sensors are lit in 98 Olds Intrigue


Yes it is possible that you have a bad wheel bearing which has the abs sensor in it. Hence the abs light on. Traction control utilizes the abs as inputs therefore traction control will come on.

Jun 18, 2012 | 1998 Oldsmobile Intrigue

1 Answer

How to turn traction control on a 2004 chevy venture.abs light is on but wheel bearing has been replaced


SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Jul 15, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Service light has come on and brake, anti lock, and trac off lights has come on whats the problem?


This is related to the anti-lock and/or traction control system. May be a controller but most likely one of the front hub sensors is bad. Modern cars mostly use a sealed hub instead of the old timken taoer bearing system of years past. The hub is not difficult to change if you are handy and they can be found relatively inexpensive on the internet.

Jul 14, 2010 | 1998 Buick Regal

2 Answers

Where wheel speed sensor is located on 2001 pontiac grand am se


2001 Pontiac Grand Am 2.4L SFI DOHC 4cyl

Vehicle Speed Sensor - Location:
The speed sensors are built right into the wheel bearings of your vehicle, at the front and rear locations. They work both with the anti-lock brakes and with the traction control systems on the vehicle.

Removal & Installation
Front
The front wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Front Suspension for service procedures.
Rear
The rear wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Rear Suspension for service procedures.

I hope help you with this (remember rated this help) Have a nice day, good luck.

Sep 23, 2009 | 2001 Pontiac Grand Am SE

2 Answers

How do i change wheel speed sensor on a 2001 grand am se


2001 Pontiac Grand Am 2.4L SFI DOHC 4cyl

Vehicle Speed Sensor - Location:
The speed sensors are built right into the wheel bearings of your vehicle, at the front and rear locations. They work both with the anti-lock brakes and with the traction control systems on the vehicle.

Removal & Installation
Front
The front wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Front Suspension for service procedures.
Rear
The rear wheel speed sensor is part of the hub/bearing assembly. Refer to Wheel Hub and Bearing Replacement in Rear Suspension for service procedures.

I hope help you with this (remember rated this help) Have a nice day, good luck.

Sep 23, 2009 | 2001 Pontiac Grand Am SE

4 Answers

Impala - trac off and ABS light along with service traction syst


THE PROBLEM IS WITH A HUB WHEEL SPEED SENSOR OR MORE LIKELY THE HARNESS LEADING TO THE HUB.

CHECK THE RESISTANCE AT THE HUB CONNECTION, IT SHOULD BE BETWEEN 900OHMS AND 1300OHMS. THEN SWITCH TO A-C VOLTAGE, IT SHOULD BE 100MV WHEN TURNING THE WHEEL BY HAND. IF BOTH CHECK OUT THE PROBLEM IS IN THE WIRING TO THE HUB.

THE RIGHT FRONT HUB USUALLY HAS A BEND, DOWNWARD THEN UPWARD NEAR THE CONNECTOR TO THE HUB. THAT IS WHERE THE PROBLEM USUALLY OCCURS.

NEW HARNESS WIRES CAN BE BOUGHT AT THE DEALER.

Jun 14, 2009 | 2003 Chevrolet Impala

6 Answers

2005 Impala abs & traction control problem


2005 Impala it turn off some times when I am coming to a complete stop or when I am slowing down but it starts right back up with no problem can you help me

Nov 10, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2005 Hummer H2 Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...