Question about 2003 Chevrolet Venture Passanger

2 Answers

How to turn off the change oil light in a 2003 chevy venture

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 410 Answers

What you need to do is turn the ignition key to the on postion (but do not start the vehicle). Next, push the trip odometer button a few times until the word oil appears on the screen. There will be a number next to the word oil. Hold the button in until the number 100 appears next to the word oil and then your good to go. Let me know if you have any further questions about this. Thanks for rating my response and for using FixYa!

Posted on Jul 30, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Turn the ignition to "on" but do not start it. Depress the brake pedal fully three steady times within 5 seconds and notice the light flash twice after you release the pedal. Turn off. It's reset!

If after the 3rd time pressing the pedal, the light stays on and does not blink, try again. You probably didnt press the pedal 3 times fast enough.

Posted on Jul 30, 2009

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Thermostat in a 2003 chevy venture van

the bottom boult is hard but can be done need to use a 10 or 12 stubby wrench and take a pry bar and lighty pry heat shild away to get bottom bolt dont need to take it out all the way just loosen and slide down

Posted on Aug 17, 2008

  • 1 Answer

SOURCE: Thermostat in a 2003 chevy venture van

no you dont need a special tool you have to take the throttle body off it makes it sooooooo much more simple.

Posted on Jan 27, 2009

  • 1 Answer

SOURCE: How much oil does my 2003 chevy venture need for an oil change?

The book says 4 1/2 quarts of oil...

have a great day.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low oil pressure light comes on in 2003 chevy venture?


Oil level? Last time serviced? Oil filter changed? Number of miles? Regular service as required by Owner's manual? Otherwise if none of these are a problem, you may have a failed or failing oil pump. Worst case is bearing problem.

Feb 13, 2015 | 2003 Chevrolet Venture Passanger

1 Answer

How to turn off change oil light on the 2004 Chevy Colorado Pick-up truck ?


1. Turn the ignition to ON do not start.Engine OFF dash board lights ON.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
Alternate Method
1. Turn the ignition key to ON with the engine off.
2. Fully press and release the accelerator pedal 3 times within 5 seconds. Several beeps sound. This confirms the oil life system has been reset.
3. Turn the ignition key OFF.
4. If the CHANGE/OIL message comes back on when you start the engine, the engine oil life system has not reset. Repeat the procedure
I use the second method, it is more universal and it works for Chevy Venture too.

Nov 06, 2010 | 2003 GMC Sierra

1 Answer

The Service Engine Soon light came on. Could this be something serious or just a reminder that I just hit 80,000 miles and I should take it in. I had the oil changed and fluid levels checked and belts and...


Service engine soon light is alerting you that a code is stored in your computer. If not checked out it could be something that will have an effect on other parts and may cost mor to fix. Most auto parts stores will check it for free.

Mar 19, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Need help with oil light


If your oil light is on, then it'll mean either your oil level is below the recommended level; the oil pressure sensor is bad, there's a leak somewhere reducing the pressure of the oil); the oil pump is faulty

Sep 29, 2009 | Chevrolet Cars & Trucks

2 Answers

2003 chevy venture transmission slow to shift from 1st to 2nd and then from 2nd to 3rd.


Probably due for a trans service--which is flushing the trans and replacing the trans fluid and filter.

Aug 08, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

How to reset the change oil light on a 2003 chevy silverado


Information courtesy of synthetic-direct.ca
Chevrolet Suburban/GMC Yukon XL, 2000-05 Chevrolet GMC Trucks Silverado, Sierra, 1999-05 Chevrolet Venture 2000
Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.
Best of luck.
Greg

Jul 15, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

Thermostat in a 2003 chevy venture van


no you dont need a special tool you have to take the throttle body off it makes it sooooooo much more simple.

Nov 27, 2008 | 2004 Chevrolet Venture Passanger

1 Answer

Reset mesage


press trip button till oil reads in the dash (it is a count down) once there press and hold button down till it resets.

Aug 24, 2008 | 2003 Chevrolet Venture Passanger

1 Answer

No brake lights. Brake light above lift gate works but no brake lights. 2003 Chevy Venture


I own a 2003 venture,all the back lights stopped working except the one above lift gate.I changed circuit boards and everthing worked fine this was in feb.Now six months later(august)I had to order another board this one shorted out and melted the part that plugs into the board(does anyone know what the name of that part is?)

Jul 25, 2008 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

1,370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...