Question about 2001 Chrysler Town & Country

2 Answers

Stalling when engine cold. Typically, when pulling away from stop sign or traffic light. Runs great once warmed up. Mechanic can't find any codes or other problems.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Have your idle air control solenoid checked or replaced.

Posted on Jul 30, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If you are taking the car to the mechanic and he tests it while its warmed up, its possible he might not catch the problem since it only happens when the car is cold. Try leaving the car with the shop over night so they can test it when its cold. It is possible that one of the sensors that calculate how much air is entering the engine could be malfunctioning and sending false readings to the computer making it think that the engine is already warmed up.

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge 2006 caravan sxt 3.8L. Engine started running very sluggishly 2 weeks ago. Worse at low speed such as 0 - 10 mph. Cruising at 65 mph and then to say 5 mph in traffic causes engine to appear to "


Depending on the actual code for the O2 sensor, the fuel pressure may be low at times. You may want to look at fuel pressure and delivery.

Sep 22, 2014 | Cars & Trucks

1 Answer

Intermittent stalling


I have had that happen before,Mine was crank sensor.The three things i know that would cause that problem.#1 crank sensor #2 cam sensor #3 module plate under coils.

Apr 15, 2014 | Pontiac Sunfire Cars & Trucks

1 Answer

I changed cam phasers and runs great when cold. When it warms up it stalls at stop lights and gets difficult to restart


have vechicle code scanned bad engine coolant temperature sensor will cause vechicle to stall out and hard to crank when cold.

Sep 11, 2012 | 2004 Ford F150

1 Answer

1993 buick skylark stalls


Is the check engine light on ?
It sounds like the engine temp sensor is not right, but if that were true you should have a check engine light and a code for the sensor.
Have you checked fuel pressure ?

Aug 21, 2012 | 1993 Buick Skylark

1 Answer

Problems accelerating


the engine tickover is too slow when the engine is cold its running on cold start, ie:choke,, after it warms up the engine slows down this is what is causing it to stall in gear,, get some one to hold the brakes hard on and with the engine running in gear ajust the tick over till its reving at 750 - 850 rpm the revs will go up a bit when its out of gear,, before you pick a gear to go into push the foot brake down to stop the car lurching,,,

Feb 19, 2010 | 1997 Cadillac DeVille

1 Answer

Car not idling adn stalling when it is cold


sounds like the idle control vale is sticking when it is cold. It is located on the throttlebody right at the air inlet

Feb 24, 2009 | 2001 Mercury Sable

3 Answers

Low speed stalling while engine is warm


It just might be that the choke is stuck open.

Feb 13, 2009 | 1994 Dodge Caravan

2 Answers

Low idle, stalling frequently


Hi, Check all vacume hoses and fittings make sure there are no vacume leaks also make sure ignition timing is correct.

Dec 01, 2008 | 1987 Toyota 4Runner

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...