Question about Isuzu Rodeo
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is your diagram. Good Luck and say thanks..lol http://www.2carpros.com/car_repair_information/tec_info/2000/isuzu/rodeo/2000_isuzu_rodeo_drive_belt_routing_diagram.htm
Posted on Dec 27, 2008
Here's two belt routing diagrams.
The first is for the 2.2L engine and the second is for the 3.2L.
Hope this helps.
Posted on Nov 07, 2009
Testimonial: "THANK YOU!! I was going crazy. Couldnt have done it without you help. "
This has to do with the Auto's Computer system and should ONLY be done by a Factory Rep who knows what he/she are doing. not a home mechanic chore!!
Posted on Jul 16, 2010
It's located just under the driver side door, and then behind the outermost frame bar. The new one will denote which direction to install it. I recommend grabbing some rubber sheathed hose clamps from the store while you're there.
First locate the bleeder valve on the fuel rail.
It's just underneath the plastic cover on the engine, follow the silver rail that runs across the front and goes back on both sides, it's on the right side, just under the left-side blue refrigerant valve cover. Open the cover (black) and be sure to have a rag under and on top of it as you use a screwdriver to release the pressure on it - just push the pin in the valve. Air will come out, then a little gas, so be ready. Replace the cover.
Open your gas cap. Now the pressure is off of both sides.
Use the clamps to close the lines going into it, in and out. Clamp them about 3 or 4 inches from the filter, to leave yourself room to work.
Remove the bolt on the mounting bracket, it will take a socket to get it, as salt and other road juices will have rusted it pretty well since the last time it was changed. Please don't try to use an adjustable wrench, unless you really want to punch the underside of your car.
Factory hose clamps, self explanatory. Vice grips are good for this.
Use the vice grips to gently wrench the hose from the filter. This will take some work, it's on there very tight from the existing pressure in the lines. just don't clamp them so tight that it might tear them. Just hand tight and wiggle back and forth.
When it comes off, gas is going to spill out, be ready. Quickly replace the filter and replace the factory hose clamps, remove yours, and remount it in the bracket.
Close your gas cap!
Start your car a few times to get the pressure back in the lines, and you're all set.
Posted on Aug 15, 2010
Tips for a great answer:
Jul 19, 2010 | 2000 Isuzu Rodeo
Feb 27, 2010 | 1995 Isuzu Rodeo
Nov 07, 2009 | 2000 Isuzu Rodeo
Sep 29, 2009 | 1998 Isuzu Rodeo
Apr 17, 2009 | 2000 Isuzu Rodeo
Mar 27, 2009 | 2000 Isuzu Rodeo
Jan 13, 2009 | 1998 Isuzu Rodeo
Nov 19, 2008 | 1992 Isuzu Rodeo
Jul 30, 2008 | 2000 Isuzu Rodeo
246 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: