Question about Oldsmobile Cutlass Ciera

1 Answer

Car is stalling while driving. It also seems to

1993 cutlass ciera is stalling while driving. It also seems to heat up a bit at the same time. Once it is turned off it will start up again right away, but then stalls again before long.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Have your fuel injectors checked !!.When they start going bad one or more will short out ,then the quad driver in the computer which controls injector pulse will shut down until it cools off a little.Then you can start your car .:)

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Oldsmobile cutlass ciera is stalling and won't restart after engine is turned off


Two thing, maintenance will be first[tune up,fuel filter,air filter].Second could be crankshaft sensor.

Mar 14, 2013 | 1989 Oldsmobile Cutlass Ciera

3 Answers

My 93 oldsmobile cutlass ciera stalls too much


Check the oil. Quite a few cars do that when they are low.

Sep 26, 2017 | 1993 Oldsmobile Cutlass Ciera

1 Answer

I have a 1993 cutlass oldsmobile ciera and when i go to stop and start breaking the car starts jumping and dies out. what could the problem be?


There was a common fix for your car. Your ciera has a lock up torque converter when you go into opverdrive there is a wire connection on the side of your transmission it feeds power to a solenoid located on the valvebody, it is supposed to disengauge when you are comming down to a stop, if it does not it feels like you have a standard transmission in it and to forgot to push in the clutch. Try disconnecting the connector and drive it, if it does not stall you have found the problem.

Jun 05, 2011 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1993 oldsmobile cutlass ciera. Engine stalls when you stop


Checkk the EGR system for the EGR valve should open when the engine gets to operating temperature. If not the engine will stall out

Jun 19, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

My 1993 cutlas supreme stalls randomly while idling or driving , but restart right away


You will need to change the crank position sensor first and see if it corrects the problem. It is located behind the engine near the firewall. It's a bit tricky to get to it, you would need to rotate the engine forward then look under the exhaust manifold and under the cylinder closest to the drivers side. Use a 10 mm deep socket to loosen bolt. After replacement and it is still stalling then you will need to replace the ECM (vehicle computer). If it turns out to be the computer, go to your local junkyard to get an inexpensive replacement Click on the link below to view the CPS, it is around $22

http://www.partstrain.com/store/?N=0&Nr=AND(make:Oldsmobile,model:Cutlass+Supreme,year:1993,brand:Delphi,part:Crank+Position+Sensor)&ptc=S1171391678W45d204bec356b&ptid=ptc45891f6tnywz&id=Olqtv7cphi





Olds-Cutlass-Ciera.htm">http://en.allexperts.com/q/Oldsmobile-Buick-Repair-826/f/1992-Olds-Cutlass-Ciera.htm

Apr 12, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Won't run when warm


It sounds like you need to change the fuel filter.

Mar 26, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

93 olds ciera stalls when slowing down or stoping


tcc stuck try unpluging it and see if same but dont drive with unpluged will burn up transmission also could be fuel pump . or crank shaft postion sensor . try the tcc first then vheck fuel presure , and then check for codes with scanner

Jan 28, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Stalling at a stop


Had a similar problem with a GM van once. Has the inline fuel filter ever been changed?

Apr 26, 2009 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...