Question about 2002 Hyundai Santa Fe

1 Answer

What is the minimum rear brake rotor thickness for 2002 Hyundai Santa Fe

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 36 Answers

.331 (In thousandths of an inch) If brake rotor measures at or under this
specification, it must be discarded.That's if you have the V6 and 2WD. IF that's not what you have check here

http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain.jsp?categoryName=BRAKES+%26+TRACTION+CONTROL&childCategoryNameForTitle=Brake+Rotor+Minimal+Machining&appQuestionName=Rear&childCatId=24400232&categoryNameForTitle=Brakes+%26+Traction+Control&appQtext=Rear&categoryNValue=24499999&appQId=4294933443&childCatName=BRAKE+ROTOR+MINIMAL+MACHINING&appIdsArray=#

If that doesn't work got to the autozone website and click repair info then click specification, then brakes and then minimal maching.

Posted on Aug 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Avalanche minimum rotor thickness


Rear Brakes JC5/JH5 Utility Only
Rotor Discard Thickness* .............................. 28.50 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish ....... 29.0 mm (1.142 inch)
Rotor Thickness-new .................................... 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout ................. 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring ........................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation ........... 0.025 mm (0.001 inch)

Rear Brakes JH6
Rotor Discard Thickness * ............................. 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish ....... 28.0 mm (1.102 inch)
Rotor Thickness-new .................................... 29.0 mm (1.141 inch)
Rotor Maximum Allowable Lateral Runout ................. 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring ........................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation ........... 0.025 mm (0.001 inch)

Nov 12, 2013 | 2002 Chevrolet Avalanche

1 Answer

How do we change the rear brakes shoes that are behind the rotor on my 2002 santa fe


remove tire remove caliper and pads with two bolts and adj emergency brake off all the way or untill rotor will come off .Replace shoes (if you don`t know how remove only one side and install other side the same then install remaining shoes.)If rotor or inside drum surface is rough turn or relace rotors. Adj brakes up (parking) and reinastall caliper.Pump brakes half way down only till good pedal not all the way down or the piston in master cylinder will go to end of stroke where all the gook is and you`ll replace master cylinder very shortly

Jun 23, 2011 | 2002 Hyundai Santa Fe

1 Answer

Rear brake caliper on 2002 Hyundai Santa Fe


no,it is not normal,get a new pin and replace it.

May 08, 2010 | 2002 Hyundai Santa Fe

1 Answer

ABS braking system engages at slow speeds or while


Are there any malfunction lights coming on? If so then it could be a wheel speed sensor. sometimes people confuse rotor vibration with abs pulsation.

Apr 28, 2010 | 2002 Hyundai Santa Fe

1 Answer

What is minimum thickness on front rotor for 2004 sante fe and are ceramic pads required


1/8th inch pad thickness.discs if undercut by more than 1/32nd must be scrapped.they are so cheap anyway.......buy new.

Mar 06, 2010 | 2002 Hyundai Santa Fe

1 Answer

Similar problem on honda civic 98


Not unless the rotors are worn out past their minimum thickness. Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Jun 11, 2009 | 2001 Hyundai Santa Fe

1 Answer

PARKING BRAKE LEVER- NO TENSION / DISC BRAKE ADJUSTMENT-OFF


If you remove the cover of the E-brake there should be a tention ajustment that you can do yourself.

May 19, 2009 | 2003 Hyundai Santa Fe

1 Answer

Rear Rotor removal problem


you have to adjust the parking brake down, using a flat head screwdriver you must turn the starred adjuster wheel counter clockwise to adjsut the parking brake down and allow you to remove the rotor

Apr 11, 2009 | 2002 Hyundai Santa Fe

1 Answer

Parking brake


I just replaced rotors on my 2003 Santa Fe, There are 2 phillips screws in the rotor that must be removed. There is an auto adjuster on bottom of brakes. That inspection hole is very small! Sometimes you must tap a hammer around the drum to loosen the rust. Hope this helps.

Sep 14, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...