Question about Ford Expedition

2 Answers

Thank you for your help on my expedition but how much does a ignition switch cost ,is it a easy do it yourself thing or take it to a shop

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Go to tascafordparts.com for cheap parts. Do you need lock cylinder or electrcial ignition switch?

Posted on Jul 30, 2009

  • 1 more comment 
  • gerry bissi Jul 30, 2009





    SECTION 211-05: Steering Column Switches

    2002 Expedition/Navigator Workshop Manual
    REMOVAL AND INSTALLATION


    Ignition Switch

    Removal


    1. Disconnect the battery ground cable (14301).


    1. Remove the instrument panel steering column cover; refer to Section 501-12 .


    1. Disconnect the ignition switch electrical connector.

      1. Loosen the bolt.


      1. Disconnect the electrical connector.


    1. Remove the ignition switch.

      1. Remove the screws.


      1. Remove the ignition switch.




  • gerry bissi Jul 30, 2009





    SECTION 211-04: Steering Column

    2002 Expedition/Navigator Workshop Manual
    REMOVAL AND INSTALLATION


    Ignition Switch Lock Cylinder —Functional Lock Cylinder

    Removal


    1. Disconnect the battery ground cable (14301).


    1. Remove the ignition switch lock cylinder (11582).

      1. Insert the ignition key and turn to the RUN position.


      1. Press the ignition switch lock cylinder release tab while pulling out the ignition switch lock cylinder.

  • gerry bissi Jul 30, 2009

    usually, you have to insert a pin in the hole to depress the relase tab in the lock cylinder

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

TRY AUTOPARTSTRAIN.COM

Posted on Jul 30, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: i have a ford escort 95 that needs the ignition switch replaced

take the plastic cover off the steering column behind the steering wheel the switch is the unit behind the ingnition cylinder( where you put the key in)this should just un bolt and pull of

Posted on Jan 06, 2010

  • 396 Answers

SOURCE: how much will it cost to replace a intake gasket

You must be talking about the 3.1. Very common problem. If you are NOT mechanically inclined, Don't attempt. There are 2 styles of gasket sets. Won't know which 1 you need until you take apart. The standard set costs about 56.00. The upgraded version is 86.00. Also change the thermostat,antifreeze and oil and filter. Dealer will charge about 5 to 600 . Backyard Joe, about 350-400

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Service advance light on won't go in four wheel drive


Bad connection, or frayed insulation short to frame or break in the wire. Bad switch? Does power side of switch actually have 12vdc?

Mar 12, 2015 | 2003 Ford Expedition

1 Answer

I have a 1999 ford expedition 4x4 with 163,000 runs great gets regular maintenance. This morning i noticed the truck running weird. The rpm was getting up to 3 to shift at 30 mph. the truck was warmed...


There are no new transmissions avail

Their only new one time off the assy line

Transmissions or rebuilt locally or remanufactured

Could be the solenoids inside the trans pan
otherwise the trans is slipping

I wouldn't use it at all untill resolved

Ten miles of driving with any slipping you will ruin it

There is no reason to do something not needed or over charge
you or any other thing if you educate yourself & ask questions
& be at these shops & ask for proof of what is told to you

Do not go to a dealer,then you will be a victim of fraud & over charged

Any trans shop will want to rebuild it whether it needs it or not but
that is where you have to go.

Jan 30, 2013 | 1998 Ford Expedition

1 Answer

Ignition switch replacement 1999 ford expedition


Hi Roni Jones...
You can purchase a new ignition switch replacement at your local auto parts house...or they can order it for you.
They are pretty easy to replace...talk to your parts supply man and he can probably explain how to replace the switch
Please rate me
Bud

Sep 27, 2012 | 1999 Ford Expedition

1 Answer

Key broke in ignition, would to replace ignition with new cost to expencive from dealers would like to do this myself ........need some help or a instaltion manual 2005 chevy clbolt


The first time I did this I went to the local auto parts store and bought the shop manual for the car, which shows how to remove and replace ignition switch. (manual was around $25) Then I went to auto wrecker parts yard where they left ignition keys in the car, and got practice by removing the ignition from the donor car. Next head back home to replace your old ignition switch. This is cheapest way to do it yourself.

Jun 30, 2010 | 2005 Chevrolet Cobalt

2 Answers

Is it possible to replace a belt yourself or do I need to take it t the shop?


ITS VERY EASY TO REPLACE BELT YOURSELF ,WILL COST U A BOMB IF U BRING IT TO THE SHOP

Jun 18, 2010 | 2000 Jeep Cherokee

2 Answers

2004 Saturn ION wont start when it get cold? help, suggestions, please!


You have to replace your ignition switch/starter. Its a common problem with ions yet no recall. Just google it and you will get tons of threads. Its a costly repair too around 400 dollars :-(. I have had to replace mine twice in 3 years

Feb 01, 2010 | Saturn Ion Cars & Trucks

1 Answer

1) Apx. how much would it cost parts & labor to change Ignition switch on a 1998 Nissan Maxima SE? 2) Do you think I can find the parts?


HI, the cost of the ignition switch is $27.99. the labor cost is usually figure by the hour and it is set a 50 dollar an hour increment. In my shop, we have a set minimum labor charge of two hour as most shops in my area. Total estimated cost including the labor and parts should be around $127.99 give or take.

You can most certainly purchase this part yourself on-line at www.autozone.com

Part Number is - LS812
OEM Number---- 48750- 1E411

Please rate and god bless:)

May 07, 2009 | 1997 Nissan Maxima

1 Answer

2001 Ford Expedition: inexpensive new ignition (transponder) key?


the old keys or another expedition key can be reprogrammed to your vehicle, the only thing is you would have to change the lock cylinder to match the key or swap the ignition from another expedition with that has the key

Apr 21, 2009 | 2001 Ford Expedition

1 Answer

97 ford 4x4 expedition rear differential makes a winding noise


Yes this can be fixed. Sounds like your spider gears have decided to cause you problems. If you can't do the repairs yourself take it to a good gear shop. They can replace the shims and or bearings. Do not attempt this if you know nothing about setting up gears. Don't waste your money by purchasing a used differential. Like I said a good gear shop can do this for you. Shouldn't cost to much.

Feb 15, 2009 | 1997 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...