There are usually a combination of 4 nut/bolts per seat. You'll need a T55 or T50 torque bit and an 18mm deep socket to remove these. To access them slide the seat to the extreme front and rear. Once all nuts/bolts are removed tilt seat back and undo wiring harness from underneath. You have to remove both driver and front passenger seat to remove the centre console /middle seat.
SOURCE: im trying to hook up a 2002 yukon power seat to a
BEST TO USE 2005 YUKON ORIGINAL SEAT I WOULD NOT USE OLD MODEL TYPE WIRING WILL BE DIFFERENT.
Please see my tip at http://www.fixya.com/cars/r6235876-no_heat_fan_blowing_cold_air . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.
414 views
Usually answered in minutes!
×