Cars & Trucks Logo

Related Topics:

k
keith jett Posted on Dec 17, 2017

When holding in plunger and lighting after waiting 10 sec the fire gos out

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2005 Ford Expedition. Yesterday, I was driving along and simultaneously my gas pedal no longer brought rpms up or anything and the wrench light came on. What different things could be wrong? We...

It went into Limp Home Mode. You just got to reset. It. Make sure battery is charged .Turn key on wait about 10 seconds. Turn it off. Wait 5 sec. Turn key on. Wait 10 sec. Turn key off. Wait 5 secs. Then start it up. It should be fine after that. Otherwise.?
0helpful
1answer

328I 1996 RESET ENGINE LIGHT

hold 000 knob and turn ignition on wait 10 sec then let go the knob on dash and press it again then let go after 3 sec
switcjh off then on again
1helpful
1answer

I have a mk3 golf gti 16v sometimes it starts revs once then cuts out and won't fire up! i leave it for a few hours then it starts no problem!

you need to reset the alarm/immobiliser system...put key in drivers door and unlock/hold key over,windows will go down,wait 30 secs.
then,lock/hold key over ,windows will go up,wait 30 secs then press/hold unlock button on remote to reset system.(if you have,nt got a remote,you will HAVE to buy one)and make sure you have newish batteries in remote.
you can buy a "superchip" for this car @volkstuning,goes like stink....
0helpful
2answers

Hazard lights flashing and remote fobs not working only manual key open and locking doors Audi 2003 a4 sport 19tdi

replace batteries in remotes,then with key unlock car/hold key over windows go down,wait 20 secs,then lock/hold key over,windows go up,wait 20secs, then using remote press/hold down the unlock button for 30 secs.you have just reset the alarm/immobiliser.if remotes/keys dont work after this,then take it to a dealer for a computer/key reset.
0helpful
1answer

Service light is on .

you need to reset it.
try this ; key on , engine off , if you have trip meter button rapidly press it until odometer displays.
turn key off , press and hold trip meter at the same time put the key on , if you see the bar , wait till it finish reseting(10-15 sec).
if you have reset button do the same with reset button.
0helpful
1answer

Turns over no start security light on

turn key on dont start, wait 10 min security light goes out turn off key wiat 10 sec then strt as normal Postal
1helpful
2answers

How can i erase the light (MAINT) in my 4 Runner 2003

I think you hold down the Trip reset button, then turn the key on and wait 10 seconds
1helpful
1answer

2005 honda odyssey ~ cannot remember how to reset the oil change

hold in the trip meter button on the dash before you turn on the key... keep the button pushed in, turn the key on, and wait until the light goes out( 10 sec or so)
Not finding what you are looking for?

24 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...