Question about 2004 GMC Envoy

1 Answer

I have a 04 Envoy and the day-time/low beam lights won't turn on. All the other lights work, high-beams/fog lights, so I'm thinking its the sensor on the dash. Please help

Posted by on

  • jensevde Jul 30, 2009

    I did. I checked the bulbs, they were good. Checked the fuses, they were good too (the high and low beams are on seperate fuses). The lights went out when I started my car last night. Can't figure it out, but hope its not expensive :(

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hi beam/lo beam/DRL may be on separate fuses. Check your DRL (Day Running Lite) fuse

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My day time running lights are work as do my high beams, however my low beams do not, but i thought they were all the same bulb? Also, now by fog lights won't come on -only work when low beams work


Your fogs only working when low beams are on is normal, as far as your low beam lights not working, I would have the headlight switch checked, or check for a bad fuse or possibly a relay if your car has a light relay. Some do and some don't, I am not that familiar with your model of car to tell you for sure.

Dec 17, 2015 | 2009 Hyundai Accent

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help


Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)

Jun 29, 2012 | 2003 GMC Envoy

2 Answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...


It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

May 08, 2011 | 2005 Ford Focus

1 Answer

Headlights went out. Replaced bulbs and switch and still lights don't work. Fog lights and high beams work? What else can work?


If high beams work and low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of these relays located next to each other. One controls the low beam headlights and the other the cooling fan. Swap the relays and check your low beam headlights. If the low beams work you have a bad relay.

Sep 20, 2010 | 2006 GMC Envoy

1 Answer

Low beams stopped working but all other lights work


Need to have an electrical shop determine what is wrong.

It could be a fuse for the low beam headlamps that has blown,
or a relay has been overheated.

Check that the bulbs for the low beam aren't blown out, possibly
simultaneously.

Jul 08, 2010 | 2004 GMC Envoy

2 Answers

Low beams on 2002 trailblazer won't turn on?


something might be broken inside. Those things are very easy to break try playing with it

Jul 24, 2009 | 2004 GMC Envoy

1 Answer

Low Beam Lights Won`t Work


you need to change the dimmer switch it has gone out

Mar 09, 2009 | 2002 Pontiac Grand Am

2 Answers

I have a 2004 Envoy XL. The passenger side dim headlamp went out about 2 weeks ago and I replaced it. On Friday, I was leaving a meeting and I noticed my neither one of my headlamps were on, then I hit a...


This sounds like a loose connection/bad wire somewhere for the low beam lights. Can't really give you more information without seeing the vehicle, and wiring diagram for the circuit. Usually, things that go on and off when hitting bumps are connection/wiring problems. The fact that one of your low beam headlamps burnt supports this theory. Bad connections or wiring mean lower voltage, thus higher amperage at the bulb, motor or whatever it's running, which makes them burn a lot quicker.

Jan 13, 2009 | GMC Envoy XL Cars & Trucks

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...