Question about Seat Cars & Trucks

1 Answer

I don't need help. I have a question as to why all these woman just didn't slap the men?

My boss played patty cake on my bottom side when I had my hands full of a part which I couldn't put down on the spot. I put it down and followed him right to his office and tapped him on the shoulder and in front of all my follow works I hit with my fist as hard as I could. Two days later I went to is office for more orders. His remark to me was "I have none done as you chipped a bone in my shoulder." My remark back "Guess it sucks to be you maybe you learn. Well he was transferred to another deportment. But, this day He did the same thing. I went after him as far as his new department. I didn't want to leave my dept. "Hubby says I always get even" This day he can into my dept. again. This time he was pushing the flat cart. His bottom side & back were in a 90 degree angle. I reached over and picked up a 1/2 X 1/2 about 40 inches long and snapped the piece of oak across his bottom side. He grabbed the seat of his pant. He came back and told he had a welt across his seat that is was just about to break open. My remark was "Sucks to be you next keep you hands to yourself. I never had a problem with him again. This was in the last 1980's.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Seat Master
  • 45,620 Answers

Men who intefere with women are always in a position of control
control over career, position, wealth and that is why women don't hit back -it is from fear of reprisal and non belief that such a fine upstanding man would do such a thing from male peers
You are right
A good swift, hard kick between the legs makes the idiots too ashamed to say anything as they are all basic cowards

Posted on Dec 08, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: puegeot 307 hdi 110 HELP !!!!

I have a diesel merc van that gave me same problem . Had new starter fitted by main dealer and all electrics checked but problem still there . Turned out to be glow plug relay , this faulty relay can flatten a battery over night or act like the starter motor is faulty even with a fully charged battery .mercedes next step was going to be change the ecu . I have to change this relay once a year at a cost of £50 it is easy to fit and solves the problem . Neither the main dealer or the mobile vehicle electronics specialist could diagnosed this problem . Hope this helps if it does Happy Christmas

Posted on Dec 16, 2008

  • 2 Answers

SOURCE: Transer Case; 2003 Silverado, Z71/4x4 (NP246)

Check to see if you have a pin hole leak on the passenger side of the transfer case, it will be blue in color, it is caused by a PUMP RUB issue that Chevrolet refuses to acknowledge. It will be located the 5th. bolt up from the bottom, you may be very low on fluid. For an easy fix, clean and grind slightly and place JB weld at the hole. Let me know if this is the problem. I used this technique on my 2003 avalanche and it has held for 8000 miles with no reacurrence.

Brad

Posted on Dec 22, 2008

  • 126 Answers

SOURCE: drivers side power seat and steering column don't work

i think the seat control unit controls both items. check the connections at this unit to see if they are still securely attached to the unit.

i didn't know your exact model as i could not find the 08 528i and didn't know if yours was LH or RH drive. take a look at the pic and look for box #1 under the seat.

http://www.realoem.com/bmw/showparts.do?model=PU72&mospid=50127&btnr=61_2016&hg=61&fg=25

Posted on Feb 23, 2009

  • 1 Answer

SOURCE: 2008 TT Convertible Top Issues

Release the hydrolics in the trunk. Then pull the top manually into place.

Posted on Apr 15, 2009

saailer
  • 1868 Answers

SOURCE: I Need as much advice I can get. I need it fast. I

Hello! I find it very difficult to believe that the timing chain "snapped"...First of all it would have taken the fellow several hours of removal to view the timing chain...Not to mention the fact that an engine will not run without it...Based upon what you are saying, the repair shop is not a place I would have my vehicle worked on...The mechanic may have misspoke so I'll give him the benefit of the doubt...However,"hearing" that compression is lost is not a valid test...

There are quite a few reasons why an engine would run rough...Lets keep it simple and troubleshoot the problem without spending much money...Car was running fine when you parked it...Tires were slashed...Any damage under the hood?

First, I would bring the Maxima home...Then purchase a new battery...You'll need some simple tools...A set of metric open end wrenches (10mm) for the battery terminals as an example...Also a multimeter...Home improvement stores sell them for $15-$20...

Send a comment and I'll talk you through a few simple tests...Guru.............Saailer


Posted on May 05, 2010

Testimonial: "I dont know quite how the saying goes... Buy a man a fish and you feed him for a day. TEACH a man to fish and you feed him for a lifetime!! I guess there really are "Angels Amoung Us" I know, cause you must be one of them. THANK YOU."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 dodge caliber rt slap stick put new tires on 3 months ago driver side front tire is worn cant let off wheel car pulls bad to the right side of the road


The popping could be from a bad CV axle joint, or a bad wheel bearing. Better get checked, sounds very worn. Raise the wheel on a jack and watch for play. Grab wheel at 3 and 9 o'clock, and shake back and forth-watch for play. Wheel bearing? CV joint -is boot still good? Ball joints at bottom of wheel attaching point to the control arm-check this for play, too.

Apr 11, 2017 | Dodge Caliber Cars & Trucks

1 Answer

-v 96 Harley 1200 how mutch side to side play is common on the front rod bearing rod bearings on crank


Yes it is normal to have a lot of play side to side. Not okay to have play up and down or any angle movement from zero degrees

Aug 27, 2014 | Cars & Trucks

1 Answer

2000 Windstar front blower intermittently works


Look at the relay. find another relay with the same rateing that you can borrow & still use the car (horn if same) swap relays & test 4 while if ok you know the prob is the relay. I don't think relays are expensive if yoy just wanted to try a newbie.

Jun 02, 2012 | 2001 Ford Windstar

2 Answers

We have a banging underneath the front, we think, which sound,s like metal on metal. we hade a mechanic with a tester on and it didn,t show anything worn or loose. on 2006 Grand Caravan. How can we fix...


If you mean the mechanic plugged in a code reader and didn't get any codes, some engine troubles won't make the light come on. You can't fix what you don't know is wrong so try this. Does it make the noise if the car is NOT moving? if it only makes the banging while driving then I would be looking for a loose body part. If it makes the noise while sitting still then you need to find a mechanic that can "listen" to the engine noise and determine if it is coming from the "top end" or "bottom end' of the engine.

Sep 20, 2011 | 2006 Dodge Grand Caravan

2 Answers

Need to change one of the daytime running light bulbs. Cant see how to get to it.


You will need to take the tire off of the side that the light is burned out on. Then remove plastic fender well insert. This will give you the enough room to change out any burned out light in the headlamp assembly.

Jul 10, 2010 | 2007 GMC Acadia SLE

2 Answers

Where is coolant drain plug on 1996 Chrysler Cirrus?


The coolant drain plug is located on the bottom left side of the radiator when looking from front of car. To access it you must remove the passenger side fog light and push the rubber cover out of the way.

Jun 23, 2009 | 1996 Chrysler Cirrus

1 Answer

2000 Ford contour se Alternator replacement question


whats a ford contour?? if its like a mondao then its relativly easy,disconnect battery first and make sure you have the radio code

Jan 01, 2009 | 2000 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Seat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Adam Truesdale

Level 2 Expert

293 Answers

Are you a Seat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...