Question about 2004 Isuzu Rodeo

3 Answers

Subject: 2004 isuzu rodeo...my ac/heater blower is not working

My ac/heater blower is not working when i turn through all four levels...im trying to figure out if it could be my resistor and where can i get one from (or order from online)....

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 534 Answers

The resistors are in circuit only on the lower fan speed settings.
On the highest speed setting, power is switched directly to the fan motor.
Check fan power supply fuses,
Check power is available to the fan when high speed selected.
If all above OK, apply power directly to the motor to verify fan motor runs- if it doesn't the motor may need replacement/repair.

Posted on Jul 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do i get to the ac/heater blower motor on a 2004 isuzu rodeo?

Posted on Aug 22, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

BLOWER MOTOR RESISTOR USUALLY LOCATED ADJACENT TO THE BLOWER MOTOR UNDER THE DASH ON PASSENGER SIDE THE WIRES FROM THE MOTOR PLUG SHOULD LEAD TO IT

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My heater/AC only work at level 4, how do I get the lower levels to work again?


sounds like you need a new blower resistor, its under the dash on pass. side. if it goes bad your blower will only work on high. its fairly easy to change

May 29, 2014 | 2004 Dodge Stratus

1 Answer

Heater and ac not blowing at all


The first thing i would check is the heater blower motor for power.If the blower motor has power then pull and wiggle on the blower motor resistors pigtail or connector but make sure the heater and fan motor and the ignition switch are turn on so you can here if the motor comes on. A lot of times these blower motor resistors get hot enough to melt the connector causing it to loose its connection.

Oct 26, 2012 | 2001 Chevrolet Silverado 2500HD

1 Answer

AIRFLOW KNOB FOR HEATER AC ONLY WORKS ON HIGH


you need a blower resistor. The motor may be bad, pulling high amps.

Jul 23, 2010 | 2004 Jeep Liberty

2 Answers

Blower speed question (ac/heater). This just


This is definitely 100% the Blower Motor Resistor.
Replace this and all speeds will work fine.
This Resistor is defined with 3 to 4 wires going into it, and is located adjacent to the Blower Motor.
It is easily access, removed and replaced.
I will post an additional comment on Part Number, Price and where available.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 19, 2010 | 1999 Jeep Wrangler

1 Answer

2005 malibu - heat/ac has 4 levels for fsn, level


Your blower speed resistor has gone bad and needs to be replaced. You can pick one up at Auto Zone or Parts Source with the step by step instructions to getting the resistor replaced with common tools.

It is located under the glove box, way in the back of the passenger foot area. You'll need to remove 2 screws with a 7mm socket, and remove the plastic cover that covers the blower motor and another component box that I think controls the passenger airbag. After removing the plastic cover you'll need to side that passenger airbag module to the right so it pop off its mounting bracket and move it out of the way. That will give a better view of the blower motor. I highly recommend you also remove the blower motor itself because the Blower Motor Resistor is located behind it. I think you'll need a 5mm or 5.5mm socket to remove the 3 screws that hold in place the blower motor and 2 more screws for the Blower Motor Resistor... It's a cramped location to work in but if you have all the tools and enough lighting then it shouldn't take more than 30-60 minutes to do. The Blower Motor Resistor costs about $19-$25. Good luck

Nov 30, 2009 | 2005 Chevrolet Malibu

3 Answers

Blower speeds on ac/heater for 2003 chevy pickup(v6)


Hi, sounds like your blower motor resistor needs to be replaced. If not the resistor, check the blower motor.

Jul 27, 2009 | 2008 Dodge Ram Pickup 1500

2 Answers

My heater stopped blowing this morning.


Your heater blower fan unit is in need of replacement.
It's a difficult job so take it to a service center.

Jan 29, 2009 | 2002 Chevrolet Tahoe

2 Answers

A/C and heater only works on level 4


you need to replace the resistor block or clean the contacts on the heater fan resistor block plug. find your fan and follow the wire to find the resistor block. it will have 5 wires coming out of it and be mounted in the duct work for the heated/ac. remove a few screws and pull it out and put the new one in. Mike

Jan 06, 2009 | 2002 Nissan Maxima

1 Answer

Blower control only works on high


Either the switch, relay or blower resistor has failed. I would check resistor and relay first. The resistor is a flat usually brown item attached by two screws to the blower box, usually fairly close to the blower fan. the relay is usually just upstream from there. Unless the switch feels sloppy, it's probably OK. If you can't locate these items, get a manual. It will help you with this and lots of other stuff!!
Good Luck!!

Dec 29, 2008 | 2005 Jeep Liberty

Not finding what you are looking for?
2004 Isuzu Rodeo Logo

3,352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...