Can't find the camshaft sensor on a 2008 kia sorento LX

SOURCE: Kia Sorento

http://www.kia-forums.com/kia-sorent...removal-2.html

SOURCE: Can't get the O2 sensor

use a small hammer to "tap"the edge of the nut after spaying it with wd40.then if youve one, use a socket or ring wrench,(no slip)

SOURCE: 2006 Kia Sorento code P0343 and P0463

did you ever get this fixed, i am having the same problem with mine, what was wrong with it

Marvin

• 85242 Answers
• Posted on Feb 10, 2012

SOURCE: I have a 2008 Kia Sorento LX 3.3. where is the adjuster bolt for the idler pulley? Trying to change serpentine belt and idler pulley.

The idler pulley deflects out of the way using a special wrench, the pulley is held against the belt only by a preset spring tension mechanism. You put the wrench on the bolt or in the square drive hole and deflect the pulley away from the belt, it must be manually held there to put the new belt on and then released to tension the new belt.

Jamie Alton

• 1007 Answers
• Posted on Nov 12, 2012

SOURCE: Location of camshaft position sensor for 2005 Kie Sorento

If it's an overhead cam, which I think it is, then it should be toward the very front of the engine, likely within the timing case. There should be some wires coming from it. It's usually a small black sensor.