Question about 1993 Mercury Villager

1 Answer

1993 mercury villager- drivers side seatbelt is stuck.

My drivers side seatbelt is stuck- I looked at the track, and it just won't move (slide back & forth) like it's supposed to. It doesn't move at all, so I can't use the shoulder belt. Can I fix it, or do I need to take it to a shop?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

You have a limit switch at each end of the seat belt track. One could be bad. Is belt stuck forward or at the back? It also has a module to control it.
It operates like a garage door opener. If you have to replace track, it's a big job. Have to take a lot of trim off the van. Best thing to do is get it in the rear position and just use the buckle. Get used part at car-part.com.
page with * is lowest pice. Or, go to pick n pull salvage yard and pull it yourself and learn how it comes out.

go here for team villager help

http://groups.yahoo.com/group/villagerquest/

Posted on Aug 05, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: Mercury Villager GS 1993

Yes it is the same van, just re-badged for mercury.

Posted on Nov 25, 2008

  • 6 Answers

SOURCE: turn signal flasher

The flasher is located in the area above the brake pedal. With a bright flash light, you should be able find it easily. I think the OEM shape is square shape but dont confuse it with a relay next to it.

Posted on Feb 02, 2009

  • 7 Answers

SOURCE: Seatbelt stuck

try shooting some break clean up in there to get rid of the debris that has built up over years, also they could use some lubrication, so if can shoot some wd40 or penetrating lubricant in there two.

Posted on Mar 18, 2009

  • 23 Answers

SOURCE: Removing rear seat back shoulder seatbelt guide from belt

drill it and use an easy out

Posted on May 12, 2009

  • 1757 Answers

SOURCE: i need firing order of piston on a 3.0

For the 1993 Mercury Villager 3.0L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)......
|...1....3....5...|
.......................
|...2....4....6...|
......(front)

Distributor:
..(back)
.....2
3........1
4........6
.....5
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The third row bench is stuck on one side, 2000 Mercury Villager


Try shrinking yourself until you are really, really tiny or use a mirror and flashlight to see how the mechanism works as you operate it. You may find there is a weak spring or defective latch mechanism.

Jul 31, 2017 | 2000 Mercury Villager

1 Answer

2000 Mercury Villager, third row bench stuck


you will have to take the mechanism apart and reseat the spring or replace the broken part.

May 29, 2014 | 2000 Mercury Villager

1 Answer

The motor for the front seatbelt wont stop. Is there a fuse to stop it?


There is a connector that provides power to the seat belt motor/sensor in the doorpost (passenger side) or behind the LH wall molding (driver side).
Not sure where the stop sensor is, but I think part of the drive track assembly.

I chose to replace the drive track assembly on my driver side when it was sticking / cutting out in cold weather.
Seat belt drive track

Sep 18, 2010 | 1995 Mercury Villager

1 Answer

Door issue


no difference from 93 to 98. you need to move door hinges.

go here for villager/quest help

http://autos.groups.yahoo.com/group/villagerquest/

Apr 18, 2009 | 1993 Mercury Villager

1 Answer

The seat belt gets stuck and makes a loud and distracting noise


The system can be operated manually by removing round cover cap on the B pillar (Just behind door). manually turn crank knob on top of motor.

There is a limit switch on the A pillar to turn off the motor for forward movement. There is a limit switch on the B pillar to shut off the motor for rearward movement.

You may need a B pillar limit switch if the belt is going all the way back but not shutting off. Unfortunately the rear limit switch is serviced with the track & motor assembly. Get a used one at car-part.com. Page with * is cheapest part.


You need to remove A pillar trim, B pillar lower trim, B pillar upper trim, and front door opening upper trim.

disconnect front limit switch
disconnect rear limit switch
disconnect motor electrical connector
remove 3 motor bolts
remove 2 limit switch bracket bolts
remove screw at A pillar near limit switch
remove 3 screws at track assy to roof.
pull back carpet & remove 4 screws at floor where you step into car.
remove track & motor assy.

Apr 10, 2009 | 1993 Mercury Villager

1 Answer

I just bought a 1993 Saturn SC2 and the passanger side seatbelt (its the automatic seatbelt system) is stuck forward. Neither of the seatbelts move when I open the door and I checked the fuse (which was...


Its probally off the track, you should take the molding off and move it up and down to see if it moves/slides freely,as for them both not moving  does the other functions work proper when the belts are suppose to move because if they don't it may be the ones under the hood (which I cant think of the name of them right now)you know the bigger ones.

Jan 19, 2009 | Saturn SC2 Cars & Trucks

Not finding what you are looking for?
1993 Mercury Villager Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...