Question about 1996 Nissan Maxima

1 Answer

How do i remove the factory stereo - 1996 Nissan Maxima

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

You will need either special removal tools or use butterknife and pry the little metal tabs all the way around the player. ON the player, there are little metal pins that hold onto the rest of the dash panel. These tabs need to be pried down.

Some factory players have four holes in them and you need to put a long thin nail in all four holes at same time for it to pull out

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1996 Nissan Maxima with a factory Bose CD player / cassette and radio and it will not turn on what's the solution


Maxima Bose Radio ' eBay

www.ebay.com/bhp/maxima-bose-radio

eBay1995 1996 1999 Nissan Maxima Pathfinder Infiniti J30 Radio BOSE CD tape Player ...Will fit and work in these with BOSE audio package only:1995 - 1999 NISSAN .... 2006Nissan Maxima OEM Bose Cassette & 6 Disc CD Player Radio CR13B ...DESCRIPTION Unit is missing some bottons, 3 of them, this item has NOT ...

Nissan Maxima Bose Stereo ' eBay

www.ebay.com/bhp/nissan-maxima-bose-stereo

eBayWill fit and work in these with BOSE audio package only:1995 - 1999 ... 1996 - 2000 NISSAN Pathfinder. 2004 2005 2006 NISSAN MAXIMA FACTORY BOSE STEREO 6 DISC ... Factory NISSAN INFINITI BOSE Radio, Tape, and CD Player. ... 6 Disc AM FM Stereo Cassette Radio Bose OEM LKQ (Fits: Nissan Maxima).

Nissan Maxima Car Stereo Removal and Repair - YouTube

? 8:52
https://www.youtube.com/watch?v=RT-SZEfeA4Q
Sep 16, 2012 - Uploaded by Factory Car Stereo Repair
Factory Car Stereo Repair .... I have nissan maximal 05..the CD part turns on but the cd won't eject...should ... I have a 2005maxima non-bose radio system. ... my speakers is super in my 05 maxima but my cd player keeps on ...

Nissan - Factory Car Stereo Repair



Feb 03, 2016 | Nissan Cars & Trucks

1 Answer

How do I remove the radio out of the car for repair?


Cadillac Allante Bose Stereo Removal and Repair - YouTube

? 4:44
https://www.youtube.com/watch?v=gnoCICSMdto
Mar 2, 2009 - Uploaded by Factory Car Stereo Repair
Cadillac Allante Bose Stereo Removal and Repair. Factory Car Stereo Repair ... Cadillac Allante Promo 1988? ... Restricted Mode: Off. History

88-94 Cadillac Radio - YouTube

? 1:44
https://www.youtube.com/watch?v=IQyA-i_G_Lw
Feb 25, 2012 - Uploaded by mrzhvac
Cadillac Fleetwood Car Stereo Removal 1993 - 1996 - Duration: 3:10. Factory Car Stereo Repair 3,801 views. 3:10. 1990 Cadillac Brougham ...

Car Stereo Removal - Cadillac Allante Car Stereo Removal ...




Jan 08, 2016 | 1988 Cadillac Fleetwood

1 Answer

Remove dash on 2002 chevy tracker and remove factory stereo and install new one


Glad I didn't read this page before I replaced my stereo.

Remove stereo fascia with three screws - 1 at the top, two on each side of ash tray. Remove 4 screws holding in stereo. Done - takes about 3 minutes.

Oct 29, 2011 | 2002 Chevrolet Tracker

1 Answer

How do you take of the dash paneling to install a new aftermarket cd player?


  • Disconnect the negative battery cable from the Jeep Cherokee battery with the 10 mm wrench.
  • 2 Remove the five screws on the top edge of the dash panel with a Phillips-head screwdriver.
  • 3 Pry the trim panels surrounding the climate control knobs away from the dashboard with the trim panel removal tool.
  • 4 Remove the trim panel that surrounds the headlamp switches (located to the left of the steering column) with a trim panel removal tool.
  • 5 Remove the two screws behind the trim panel that surrounds the headlamp controls with a Phillips-head screwdriver.
  • 6 Pull the dash panel that surrounds the stereo and covers the instrument panel of the Cherokee, away from the dashboard by hand.
  • 7 Remove the two screws from the stereo mounting bracket. One screw is on the bottom left corner, the other screw is on the top right corner. Each screw can be removed with the 10 mm socket and drive.
  • 8 Pull the factory stereo from the stereo mounting dock.
  • 9 Disconnect the stereo wiring from the back of the factory unit.
  • 10 Connect the Jeep Cherokee factory stereo wiring to a wiring harness adapter. Connect the wiring harness adapter leads to an aftermarket stereo. Slide the aftermarket stereo into the stereo mounting bracket and replaced two screws at the opposite corners with the 10 mm socket and drive.
  • 11 Replace dash panel that stretches across the top of the steering column.
  • 12 Replace the two screws at the top of the headlamp control switch. Replace the trim panel around the headlamp switch.
  • 13 Replace the trim panel that surrounds the climate control knobs.
  • 14 Replace the five screws on the top edge of the dashboard with a Phillips-head screwdriver.
  • 15 Replace the negative battery cable over the negative battery terminal and tighten the cable to the negative lead post with the 10 mm wrench



  • Dec 24, 2010 | 2006 Jeep Grand Cherokee

    1 Answer

    '05 Nissan altima factory stereo..... I had removed my stereo to remove a cd that had got stuck.. Once I put the stereo back and connected it I have no sound from all my speakers once I turn on my...


    it sounds like u didn't put the speaker connector thoroughly! Putting the stereo back might have disconnected the connection. Check it again!

    Nov 08, 2010 | 2005 Nissan Altima

    1 Answer

    Removing the factory stereo for replacement


    They make adapter kits for this. Try crutchfield

    Apr 03, 2010 | 1997 Mercury Sable

    1 Answer

    The DIN tools do not click to remove the factory stereo


    usually the tools push in untill they click this may be almost to the end usually 2 inches

    Jan 08, 2010 | 2001 Mazda Tribute

    1 Answer

    How can i replace the manufacture radio in my car and replace it with aftermarket car stereo


    You best bet, because of a warranty, is to have a professional shop install your stereo. But if you are like all of us guru's here, you like to get your hands dirty.

    First you need to remove the dash around your factory stereo. Be patient here and try not to break any of the dash. You may need to remove screws and pop loose plastic retainers located on the backside of the dash.

    Wire the after market stereo to the harness located below by maching the colors provided. Thank the stereo companies for making this simple. Use crimp connectors or solder your connections, which ever best suits you. Tape up any remaining wires with eectrical to minimize the chance of a short.

    Take the metal sleeve provided by the sereo you choose and install it into the install kit located below. Once you have removed the factory stereo, test fit the install kit and attach any tabs neccessary provided by the kit.

    Now take the aftermarket stereo and place into the sleeve you installe din the install kit until it clicks into its locks. Now, the harness you wired up earlier, plug it into the factory harness and then into you stereo. Hook up the antenna, you may need to purchase a antenna adapter. Now before you install the stereo, do a test run to make sure everything is working. Once you are content that it is all working, install the new stereo and then reverse the steps in removing the dash panel and stereo.
    Below are pictures of the needed hardware:
    b1a0aa3.jpg

    742ca2a.jpg

    Sep 14, 2009 | 2003 Pontiac Vibe

    2 Answers

    How do I remove the radio?


    YOU DONT HAVE TO REMOVE THE RADIO TO CHECK THE SPEAKERS. I JUST HAD NEW SPEAKERS PUT IN AND HE JUST CUT THE WIRES FROM THE FACTORY SPEAKERS AND REPLACE THEM.THE FACTORY SPEAKERS CONNECTION IS MADE DIFFERENT THAN THE REPLACMENT SPEAKERS

    Dec 27, 2008 | 1997 Kia Sportage

    1 Answer

    Stereo removal


    Removing the stereo requires disassembling the dashboard. This is done on purpose by the company to deter stereo theives. The process is the same on all CRV's from 1999 thru 2003, and is described on this page:

    http://www.geocities.com/kf6iiu@sbcglobal.net/crvdash.htm

    Sep 14, 2008 | 2001 Honda CR-V

    Not finding what you are looking for?
    1996 Nissan Maxima Logo

    Related Topics:

    108 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    726 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...