Question about 2004 Ford Expedition

2 Answers

The power turns on but no response when turning key to start the windows and all accessories work i hear a clicking coming from the fuse box but the starter does not react

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

U either have a relay out or the starter is bad. try taping on it with a hamer while someone else turns the key.

Posted on Jul 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,188 Answers

Check for a blown fuse. Battery voltage might be below 12v. It may also need replacement.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 uplander wont start, sometimes it tries to but... nothing. it cranks, acts like its not getting fuel. is it the throttle body,iac,relay or fuel pump, what???


I would first suspect the fuel pump. Do you hear it buzz on for a couple seconds with turning the key to ON, not start?
It should come on for 2 seconds to prime the line with pressure to the engine. Do you hear it? Stand by the gas tank and have someone cycle the key to on if you need to.
If you hear nothing from the tank, you need to investigate the fuel pump and it's circuit.
There will be a fuse for the fuel pump, it is under the hood in the power distribution box-the fuse/relay block. The power for the pump goes from that fuse to the fuel pump relay (also in that fuse/block) and when the engine computer signals that relay on, the power goes through the relay and then directly to the pump in the tank.
Try this test, if your pump doesn't work-test the FPR-to test if the relay is getting a signal from the computer: hold your finger lightly on the relay. now have a helper cycle the key again from off to on (not start). Every time the key is cycled you should feel the click of the relay energizing. If you feel it click and you checked the fuse and it is good, and you still have no pump coming on, then it is likely you need a new pump. Bang on the bottom of the tank, a couple of raps, then see if pump turns on. A failing pump can sometimes be turned on by jolting it like this, but it only works a time or two or three.
So now what? If the pump is working and putting fuel to the engine, then check for spark at a spark plug. Usually a sudden no start means the engine has lost either gas or spark.

Mar 14, 2017 | 2005 Chevrolet Uplander

3 Answers

There is no reaction when turning the key to start the car


Turn key to On.
Turn on headlights manually... Do they come on?
Are there any lights on the dash?
If yes to these, battery is possibly not the sole problem.
Check for good, tight and clean connections at battery terminal posts!
If yes to above, continue on & get a helper... Turn key past on, to Start position.
Do you hear a click sound at time key is turned to Start?
If yes, then ignition switch is not problem, starter relay is getting power, and is now sending power to starter, but starter is not working.
Pic any No's... Then look there.
Good luck.

Mar 29, 2015 | 2005 Ford Focus 1.6

3 Answers

What is the clicking noise come from the relay fuse box with e the motor off and the key out


It could be a couple of things. Try finding out which relay is clicking by touching the top of each relay. You'll be able to feel the click. The lid to the fuse box should have a diagram of what each relay controls. If the fuse box doesn't have the information, your car's manual will have it. In the back, look for "Fuse."

Mar 24, 2015 | 2005 Kia Sorento

1 Answer

Why will my jeep not start


Could be starter soilinoid

Sep 06, 2014 | 2005 Jeep Wrangler

1 Answer

EF Ford Fairmont 1996, accessories stop when ignition switched to start


Eg wipers work while ignition switched to 'accessories' but stop when key turned to 'start'

I had this issue and took me ages and ages of wire tracing and probing. Your fuse box should have the wiper/windows accessories fuses. If you probe them and they aren't showing voltage, check wiring harness, check wiper motor voltage. My ignition barrel was the fault of all this, everything worked when switched to "accessories", but while the engine was running, the accessories turned off. The bottom of the ignition barrel pushed out, as the factory stopper groove bent out. All I did was cold chisel a dent back into the case. BAM fixed my windows/starting/wipers all in one go.

Nov 16, 2011 | Cars & Trucks

1 Answer

Own a 1999 jeep cherokee sport has a problem when attempting to start while turning the key forward i am hearing a clicking noise from the passenger side fuse panel but the starter and engine do not turn...


The clicking noise you hear is likely the starter relay. (should be identified inside the box cover) You need to check that battery is up to full voltage, terminal connections are clean and secure and that there is 12 volts at the main power lead on the starter and power at the small trigger wire connection at the starter when the key is turned to the start position. If you have that, then very likely the starter needs to be replaced. If not you will need to check wiring and neutral safety switch as well as main fuses in the power distribution center (the box where the clicking relay is, near the battery)

Jul 31, 2010 | 1999 Jeep Cherokee

1 Answer

No start condition new battery , good starter, turn key to start position light come on dash, go forward to start light go out and you hear click under dash area like relay, no power getting to starter....


no starter relay is always at the fuse relay box at the engine compartment. The relay that you hear is the relay for the accessories to turn off the power during starting position.

Feb 01, 2010 | 1999 Ford Windstar

1 Answer

Re: engine won't turn over


to turn over the starter motor you require a lot of current . If the battery has a partial charge the accessories may work but the Car starter motor won't turn over. However you should hear a click from the starter motor soleniod.
If you hear no click when you turn the key to start the car might have an immobilizer that is stopping the car from starting ?

Jul 05, 2017 | 1995 Cadillac Fleetwood

Not finding what you are looking for?
2004 Ford Expedition Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...