Question about 2004 Jeep Liberty

1 Answer

Change out starter 2004 Jeep Liberty - 2004 Jeep Liberty

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 164 Answers

Starter should be pretty simple but they always put them down below in hard reach areas and pain the *** get out back in . Only has few connection dis connect the battire so you dont shock the hell out of your self.
It be two main bolts that hold into place and few nuts hold wires on.
Get hanes book it help you out some.
Hope this helps you out give thumbs up if it helps you out

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to change a 3.7 motor off of 2004 jeep Liberty 2wd in order to fit my 2002 jeep liberty 4wd?


engine swaps are complex as is mixing engines to wrong transmissions.
so both are 3.7L, is that it?
you never said what exacty didnt fit.
the flex plate to TC
or TC to A/T pump side mismatch.
????????
if its the flex then get the correct flex plate.
or call jeep parts? ask them for the right parts
the side of the trans has the trans part number
my guess is all you need is the correct flex plate for engine to TC.

Aug 10, 2015 | 2004 Jeep Liberty

1 Answer

2004 JEEP LIBERTY. BATTERY GOOD. THE CAR WILL NOT TURN OVER. IT SOUNDS LIKE IT IS COMMING FROM FUSE BOX UNDER HOOD


I assume you are hearing a starter Relay/solenoid chattering. That's usually caused by:

A dead battery.

A loose connection on Battery or start relay/solenoid.

Bad connection at starter or bad starter.

Good Luck

Jun 29, 2011 | 2004 Jeep Liberty

1 Answer

2004 jeep liberty won't start no click


your key starter might be bad or unplugged

Dec 05, 2010 | 2004 Jeep Liberty

1 Answer

2004 jeep liberty will not start....new battery and all my lights work, everything in side works but the POS still wont crank...thought it was the starter but im not hearin the clickin and the starter is...


probably a security but if you have two keys and both of them dont work go to a parts store that will let you borrow a code reader O reillys etc other than that get the trusty test light out and check power at starter when key is turned make sure the new starter isnt foul in up tap it with a hammer lol

Nov 27, 2010 | 2004 Jeep Liberty

1 Answer

2004 jeep liberty will not start, have power and sounds like starter is clicking but it will not turn over


Chances are battery is in need of replacement. If you can get the battery out and take it to auto parts store, have it load tested.

Mar 07, 2010 | 2004 Jeep Liberty

1 Answer

2004 jeep liberty 3.7 eng will not crank over jump start it will start battery only year old


Sounds like your altenator is bad. Most part stores will test for free, in or out of vehicle. Battery, Alt, and starter can be checked for free.

Oct 16, 2009 | 2004 Jeep Liberty

1 Answer

2004 jeep liberty replacing the starter


2004 Jeep Liberty 4WD 3.7L MFI SOHC 6cyl
Starteer - Removal & Installation

2.4L & 3.7L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the starter mounting bolts.
  4. On the 3.7L engine, the left side exhaust pipe and front driveshaft must be disconnected.
  5. Disconnect the starter solenoid harness connections.
  6. Remove the starter.
To install:

8222c5e.jpg

Fig. Starter mounting: 2.4L engine

1ab95e7.jpg

Fig. The starter position for the 3.7L engine
  1. Connect the starter solenoid wiring connectors.
  2. Install the starter and torque the bolts to 40 ft. lbs. (54 Nm).
  3. On the 3.7L, the left side exhaust pipe and front driveshaft.
  4. Install the negative battery cable and check for proper operation.

2.8L Engine
  1. Disconnect and isolate negative battery cable.
  2. Raise and support vehicle.
  3. Disconnect solenoid wire connector from solenoid terminal
  4. Remove battery cable from stud on starter solenoid.
  5. Remove 3 starter mounting bolts.
  6. Remove starter from transmission bellhousing.
To install:
  1. Position starter motor to transmission housing.
  2. Connect battery cable solenoid terminal wire harness connector to connector receptacle on starter solenoid. Always support starter motor during this process. Do not let starter motor hang from wire harness.
  3. Install battery cable eyelet terminal onto solenoid B(+) terminal stud.
  4. Install nut securing battery cable eyelet terminal to starter solenoid B(+) terminal stud.
  5. Refer to torque specifications.
  6. Position starter motor and install 3 bolts. Tighten 3 bolts in this sequence: top bolt, bottom bolt, middle bolt. Refer to torque specifications.
  7. Lower vehicle.
  8. Connect negative battery cable.

Also can review the Service Repair Manual for Jeep KJ Liberty

I really hope help you with this (remember rated this help) Good luck.

Oct 04, 2009 | 2004 Jeep Liberty

1 Answer

My jeep liberty clicks but wont start immediately it takes several turns of the ignition


if it clicks but power is good then the starter should be changed.

Sep 26, 2009 | 2004 Jeep Liberty

2 Answers

2004 jeep liberty thermostat change?


ihave to change my thermostat in my 04 jeep liberty is it hard

Oct 06, 2008 | 2004 Jeep Liberty

Not finding what you are looking for?
2004 Jeep Liberty Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...