Question about 2002 Pontiac Montana

1 Answer

Power mirrors will not work have checked all fuses. where is wiring harness for power mirrors?

Posted by on

  • Anonymous Mar 23, 2014

    thanks i will check fuse

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Hi mate, Before you start checking the wiring.
Check the switch first, they can be faulty.
If they are ok, then check if the current is coming from the fuse to the switch. And if that fails have you wiring checked last.

I hope ths helped?

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My radio, cigarette lighter and power mirrors arent working i have checked the obvious fuses what else should i check? Wire harness maybe a wire shorting where should i start looking


Definitely not a wire "shorting," but possiblu an open (broken) wire; more likely an open ground wire or corroded ground point.

May 05, 2015 | 2001 Ford Escape

1 Answer

Power mirrors not working


Check for burnt fuse. Check for loose, corroded, burnt or melt connectors at rear of the mirror switch and within the mirror assembly.
Also jiggle the wire harness at different points while keeping the ignition switch at ON position

Nov 24, 2013 | Toyota Sequoia Cars & Trucks

1 Answer

No power right front door nothing works


check fuses and relays if there good then there is a short in wiring open door and check wires make sure that they aint pinched or any broken wires on side of door between the fender should be a big harness with a rubber insulation.

Feb 16, 2013 | 2003 Chevrolet Silverado 1500

1 Answer

2005 navigator power folding mirrors


The wiring harness to the mirrors is likely rubbed through, pull the door panel off on the driver side first and check the mirror harness.

Feb 06, 2012 | 2005 Lincoln Navigator

1 Answer

I have a lhd grand cherokee and ive lost positive feed to passenger side electric windows and folding door mirror checked fuses no fuse for electric windows


There is only one fuse for all power window and power mirror operation (Fuse 12 (50A) in under hood fuse panel). If the passenger side window and mirror functions are not working, and you have verified that there is no power going to the passenger door module (pin 1 of C1 connector), then there is a wiring issue in the harness.

Sep 06, 2011 | 2001 Jeep Grand Cherokee

1 Answer

Why won't my 2003 seirra door controls work?


seriously?? what is not working...power windows? power door locks? power mirrors? start with checking
fuses, it the fuses are ok, check grounds (mabe a group ground causing all the above). do you own a dvom? you maybe required to go further looking for opens shorts and grounds within the electrical circuits in any case a wiring schematic will be required. ps check the wiring harness in the door jamb as the wires could be broken.

Apr 11, 2010 | 2003 GMC Yukon XL

1 Answer

Power mirrors don't work. Which fuse controls this


Here is repair information from Mitchells:
1) Disconnect power mirror switch connector. Connect test light between power mirror switch harness connector terminal "A" (orange wire) and ground. If test light illuminates, go to the next step. If test light does not illuminate, repair open in orange wire between power mirror switch and righ rear power distribution center fuse block No. 1 (located under left side of rear seat).
2) Connect test light between power mirror switch harness connector terminals "A" (orange wire) and "J" (Black wire). If test light illuminates, check for poor connections at the power mirror switch. If connections are okay, replace power mirror switch. If test light does not illuminate, repair open in Black wire between power mirror switch and ground.

Aug 04, 2009 | 1997 Oldsmobile Aurora

1 Answer

Right Hand mirror doesn't retract


i would check the switch first and also the passenger side door jamb wire harness also i know it sounds simple but ALWAYS check ALL of you fuses before beginning any electrical fault tracing, try removing the switch and identify which wire powers the mirror and manually jump power with a paper clip to the mirror in question there should only be three wires one will have power and the others will be left and right mirror retraction if this works your switch is bad if not go to the mirror and power that manually and if no dice you got a bad motor -jeff

Jul 14, 2008 | 2001 Honda Civic

Not finding what you are looking for?
2002 Pontiac Montana Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...