Question about 1994 Toyota Camry

1 Answer

How to put anit-freeze in my car? - 1994 Toyota Camry

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Vehicle has a coolant overflow reservoir which is a plastic tank on the passenger side engine compartment.This tank is white plastic with a green cap.This is where you can safely add coolant and the system and will be under no pressure as well. Pay attention to the level mark on the side of the plastic tank which is half full.Install 50/50 coolant water mixture into the reservoir. If you for any reason you to elect to remove the radiator cap,do so with a cold engine as the contents will be under pressure at normal operating temperatures which exceeds 200F.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 saturn 1.9 litre. Ohc. I replased water pump and still getting very warm. I found a pin hole in the underside of the radiator cap. Its on the bottom on the part above the water hole. Could...


Use anit-freeze anti-boil additive in the radiator at the correct percentage as it stops bubbles forming on the hot bits of the engine and allows for more efficient cooling of the block and head and stops the block freezing when the ambient temperature drops too low.. It also stops corrosion in the coolant parts. Some additives will not mix with bars or others so be careful when adding anything to the system.

Aug 16, 2014 | Cars & Trucks

1 Answer

WHERE DO I PUT THE ANIT FREEZE


In your cooling system.I not sure on your car but I think u have to put it in your overflow to the radiator.If u can`t put in the radiator directly it goes in the overflow.

Oct 06, 2013 | 1990 Nissan Minivan

1 Answer

Anit-freeze leaking from belhousing


sounds like you have a bad freeze plug..unfortunately, you will have to remove the trans, torque converter, and possibly the flywheel to get to the 2 freeze plugs that are on the back of the engine

Jan 07, 2012 | 1990 GMC Suburban

2 Answers

Have antifreeze leaking in front of car by the front wheels. Smells like antifreeze burning. why?


The anti-freeze smells like it burning because it is coming in contact with your brake pads (will contaminate pads and reduce life and increase stopping distance, exhaust system (most likely cause of burning smell), or some other hot spot on the the engine.

You should resolve this as it will cause over heating as the system can not properly pressurize and reduced coolant level.

Mar 12, 2010 | 2002 Chevrolet Impala

2 Answers

2006 PT Cruiser. Where does the anit-freeze get put in at? The radiator cap says"Do Not Remove". Do you at at the reservoir?


The anti-freeze is put in the radiator. I know that the radiator cap says,"Do Not Remove". Do not be afraid though. This warning is only applicable when the engine is warm and running.
You can open the radiator cap when the car has not been used for about 6 hours without any danger.
Like you can park your car overnight and put the anti-freeze in the morning. Just take not to splash the anti-freeze onto your clothes.
Thank you.

Oct 20, 2009 | 2006 Chrysler PT Cruiser

1 Answer

Anti freeze smell entering through vents, i did a radiator flush and filled with new anit-freeze


you may have a leaking heater line, check for leaks on the fittihgs and coolant lines on the system

Sep 28, 2009 | 1998 Mercury Villager

1 Answer

My check engine came on, and my car is overheating


Low in anti freeze, water pump, or the thermostat stuck. I would start by changing the thermostat, (assuming you have already checked the water/anit freeze), and go from there.

Jun 16, 2009 | 2001 Dodge Durango

1 Answer

Heater not kicking on.


you most likely have engine coolent in your oil. check your heads.

Oct 23, 2008 | 1992 Cadillac DeVille

Not finding what you are looking for?
1994 Toyota Camry Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...