Question about 1998 Chrysler Concorde

Open Question

Trans go in revers but not drive third or low

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my equinox won't run on drive or revers


Check trans fluid or trans faulty also check fuse

Aug 03, 2014 | Chevrolet Equinox Cars & Trucks

1 Answer

No reverse no egine codes


valvebody or soleniod not aplying revers band in trans 1st gear is the same clutch pac as revers only diferenc is in revers a holding band is aplied causing revers rotation

Feb 13, 2014 | 2005 Chrysler Town & Country

1 Answer

97 chevy silverado auto transmission has every gear but reverse


Put a line pressure gauge ($55 shipped on Ebay, or visit a local trans shop) on the pressure test port and go for a drive to verify proper line pressure. Base pressure at idle in P,N,OD should be around 70psi and around 140psi in R. Max line pressure should be at least 190psi at WOT in 1st or 2nd, 225psi is optimum. If base pressure is low, trans or pump is worn out. If max pressure is low, check EPC solenoid. If reverse is slow to engage, and line pressure does not come up to at least 130psi in reverse, replace the boost valve with a Transgo 0.490" boost valve (easy fix in pan).

Slow, slipping or no reverse: "lo-reverse" clutches are worn out, fluid leak in the reverse apply circuit, or broken sunshell. It is possible to remedy a fluid problem by removing the checkball from its cage in the case in the rear of the trans may help (must remove valvebody), or adding a high-viscosity additive such as Lucas Transmission additive or other seal restorer product. May also have worn boost valve (can replace in the pan)

From what you have described, it may just be a broken Sunshell which is the weak point to the 4L60E transmission. Gm had a upgraded program to lower the transmission line pressure when revers is engaged to keep the Sunshell from breaking when put in to revers.

Thank you for using Fixya and keep us posted

Oct 21, 2010 | Chevrolet 1500 Cars & Trucks

2 Answers

Transmission want shift


trans wont shift? Is this from one gear to another. First, with the car warmed up, engine running and in park (with the emergency brake on) check the fluid. If its low ad proper amount of trans fluid.If it's full you could have a probvlem so take it to AAMCO as they will diognose it for free!

Sep 08, 2010 | 2000 Dodge Caravan

1 Answer

1996 FORD WINDSTAR VAN WILL NOT GO IN DRIVE BUT WILL GO IN REVERS


Sorry, the transmission will need rebuilt or replaced.

Mar 19, 2009 | 1996 Ford Windstar

1 Answer

Do i need 2 have the car on park rever neutral or drive how could i be sure is not the transmission???


You can leave the car in Park while you check the axle. If the trans. worked fine before you replaced the axle, then I would guarantee that your trans. isn't the problem.

Jul 16, 2008 | 1995 Honda Civic

Not finding what you are looking for?
1998 Chrysler Concorde Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...