Where is the camshaft sensor in an impala 2006

SOURCE: CAMSHAFT SENSOR

Look behind the distributor on the left, actually on the bell housing.

mike loshbough

• 1011 Answers
• Posted on Jan 24, 2009

SOURCE: CAMSHAFT SENSOR

this is a miss fire code not a came sensor problem check coil or dirty injectors

SOURCE: Code P0341 on 2006 impala 3.5L engine where's the

On the 3.5 L engine it is just under the power steering pump. Three wires going to it pink /black, brown/white, are two of them. remove power steering pump and set aside. do not remove hoses. 3.5 and 3.9 chevy engines,

SOURCE: Where is the camshaft position sensor located on a

it will be located under the power steering pump. you will need to remove pump to gain access to semnsor. do not have to take lines off just unbolt pump and can move enough

SOURCE: 2006 frontier camshaft position sensor

If you do not know where the Camshaft Position Sensor is located, then it would be safe to assume that you have not properly tested the sensor or the circuits that operate the sensor. Therefore, you cannot possibly know for sure that it even NEEDS to be replaced...so why are you looking to replace it?