Question about 2004 Ford F150
You have to replace the whole motor and regulator assembly. That is the only way to get it from Ford.
Posted on Jul 29, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The local dealer was very helpful in figuring this problem out. There is a clip in the ball part of the arm. When removed, the arm releases very easily.
Thank you anyway
Posted on Nov 10, 2008
Here is a link to the removal and installation procedures for the window motor and even the switch ok?
I hope that this is very helpful for you
Best regards michael
Posted on Nov 09, 2009
Did you check for power at the main switch either before or after changing ?
This is the Light Blue w/ Black stripe wire on the switch connector, pin # 8. You need to have the truck in the run / accessory key position for power to get to here.
If you do not have power, 2 places to look.
1. The rubber boot that the wires run between the door and the a-pillar. This could be a broken wire in there, seen it 2 other times.
2. Problem with the accessory delay relay. You can check the socket of the relay for power on pin # 30. If need be, you can jumper the normally open contacts out, and see if this cures the problem ( bad relay )
Posted on Nov 20, 2009
Tips for a great answer:
Nov 01, 2016 | 2004 Ford F150
Feb 26, 2011 | 2001 Ford F150 Styleside SuperCrew
Jul 03, 2010 | 2004 Ford F150
Jan 16, 2010 | 2005 Ford F-150
Nov 09, 2009 | 2004 Chevrolet Avalanche
Oct 13, 2009 | 1990 Ford F150
Aug 04, 2009 | 1991 Ford F150
Jul 22, 2009 | 2004 Ford F150
311 people viewed this question
Usually answered in minutes!