SOURCE: 4W will not turn on ford ranger 1999 4x4
that clicking sound you no longer hear is a relay switch behind dashboard ....aftermarket one's sold at all chain auto parts stores
SOURCE: 1999 ford ranger 4x4 wont engage
ck frt drive shaft out of trans-fer case is turning if it is ck both hubs on outside of axles auto locking hubs have alot of problems
SOURCE: How do you replace a starter from a 1999 Ford
This Seems Pretty Cut & Dry Although I Have Removed Exhaust to Gain Access to Starters on the 3.0L THIS IS Instructions PER> ALLDATA
REMOVAL
WARNING: WHEN REPAIRING STARTER MOTOR OR PERFORMING ANY MAINTENANCE IN THE AREA OF THE STARTER MOTOR, NOTE THE HEAVY GAUGE INPUT LEAD CONNECTED TO THE STARTER SOLENOID IS HOT AT ALL TIMES. MAKE SURE THE PROTECTIVE CAP IS INSTALLED OVER THE TERMINAL AND IS REPLACED AFTER REPAIR.
2. Remove the ground strap bolt
3 Remove the nuts and lower the starter motor.
4 Remove the cap
INSTALLATION
SOURCE: need vacuum diagram for 4-wheel drive
the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.
42 views
Usually answered in minutes!
×