- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Probably will. The models really changed significantly in 1993. Models for 1984 to 1992 were pretty much the same. Suggest you measure everything on both to make sure. They are not hard to remover/replace.
You drill the head of the rivet out....start with a small bit and work your way up....then pop it out with a blow from a hammer and a screwdriver or punch. Then, if you don't have rivets to replace the removed ones, get a few bolts and nylon threaded nuts and use those to install the new window motor.
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door