Question about 2007 Toyota RAV4

1 Answer

The battery for the remote key went flat. How to start the car?

I have a push button start engine in my Toyota RAV4 2007. My remote control battery went flat and I could not start the car. It opened the car doors but would not start the car. Is there any emergency ignition that I can use to srat the car? Or unless I replace it with a new battey I cannot start the car?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Leave the ignition on for upto 30 minutes this will then over ride the immpb but change battery in remote much easier check with your local toyota dealer they will tell you the sequence

Posted on Aug 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The battery was changed on my car. after new one installed the alarm went off. the guy push the black button and turned the key. now the alarm wont work. how do i get it workind again? .


the guy pushed a button under my dash turned the key and car started

you need to know where that push button is under the dash

if you cant find it your self ... ring the place back for instructions

not nice but
you may have to get them to call out and show you or
tow the car back to where you got the battery fitted

Oct 11, 2016 | Cars & Trucks

1 Answer

Does the remote key for push button start have anything to do with it not starting


If the remote is damaged the car might not start. If battery in remote is dead it also might not start. However, there should be a key fob slot somewhere inside the car ( usually around the driver side knee area or inside center console ). I never worked on a 2013 Accord so I don't know the exact location, but your Service Manual should show you exactly where it is located. From my experience with Nissan dead key fob has to be in slot for car to start. Lexus/Toyota you have to tap push button START/STOP couple times with the remote fob for it to start.

Sep 22, 2014 | 2013 Honda Accord

1 Answer

2005 toyota corolla verso remote won't unlock


This one you may be stuck paying the 50 dollars but what I would do first is contact the manufacturer of the remote control. I would bet they will help you out. The other option is to go to an after market installer of car alarms that is a bit smaller. They will most likely help you in the hopes of you coming back for further business.

Mar 17, 2014 | Cars & Trucks

1 Answer

My issues with my toyota yaris it's a 12 plate Toyota I went out to it Sunday keyless entry wouldn't work, and the bush button start wouldn't work I thought flat battery so got the spare same issue, I did...


That flashing light means that the antitheft device is active. If it was not the problem in the first place, when you took out the battery, it became another problem.

Nov 04, 2013 | Cars & Trucks

1 Answer

Flat battery in keyless remote


copy or reprogram keys.

I don't know what is your car model and year, so I just can recommend you the Toyota Camry key 3 button 315MHZ.
I don't if it can do for you.

Jun 13, 2012 | Toyota Cars & Trucks

1 Answer

How do I replace the battery in my keyless remote for a 2008 Toyota Highlander?


You will need a 1632 Watch Electronics battery to begin. Press the bottom portion of the button/lever on the side of the key fob ( it says push and has a picture of a key on it). This lever will is on a spring and will push in, comparable to a door. Remove the key. Using the key or flathead screwdriver, insert the flat end into the opening, made visible by removal of the key. Apply light pressure to the area: the two halves will separate. Carefully remove the circuit board to expose your battery compartment, change battery and reverse operations.

Apr 12, 2011 | 2008 Toyota Highlander

1 Answer

Remote control has stopped working. Have tried changing the battery of the remote control but that did not work.


Does the red light on the remote light up when you push any of the button
if no, replace remote
if yes, then try repograming the remote to the car again.
-Have remotes' ready. if you have two then fob#1 and fob#2 (doesn't matter which one is #1 or #2)
-each step has to be done within 5 sec or it will not work, but don't do it super fast.
1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release
2.turn key off
3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
4.turn key off
5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
6turn key off
7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 8)and push the "lock button" on fob#2 twice.
8.turn key off and remove key from ignition.
if you did it right, remotes' should work again.
good luck

Dec 17, 2010 | 2003 Honda Accord

2 Answers

Auto theft alarm went off, now can't get it to reset. can't start truck or even unlock steering wheel to tow home or to garage. 1998 toyota tacoma


get in truck shut door . . . turn key to acc position. . .push alarm button on dash near ECT button. turn key back off .. . then to the acc position again. . then push button back like it originally was. this should help i had the same problem . only i was in the middle of the woods with no cell phone signal!

Oct 03, 2008 | Toyota Tacoma Cars & Trucks

Not finding what you are looking for?
2007 Toyota RAV4 Logo

1,381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...