Truck cranks slowly. replaced ignition relay, inhibitor relay & battery
Put a current meter on main lead to starter to see if it's drawing to much or to little power
SOURCE: location of starter/inhibitor relay for 1994 nissan pickup
its mounted on the right fender well
SOURCE: need wiring diagram
Go to autozone.com and register they have good wiring diagrams for your truck.What I saw was all the relays going to ground so you should have 12V coming off the ignition switch.
SOURCE: 1995 nissan pickup truck fuel problem
Fuel injected or carb? Make sure fuel line itself is clear. Some pumps are designed to self regulate (carb systems) some continually pump and a psi regulator sends back the excess fuel back to the tank (fuel inj systems) If the line is obstructed then pump can't deliver fuel fulltime.
If you think pump is not on consistent, try running a dedicated wire through a switch directly to the pump. If it works then you are looking for an electrical fault going to pump. Good luck.
SOURCE: My 1997 Nissan hardbody 4-cylinder pickup will not
Ignition switch or ground to the starter relay.
SOURCE: need a stereo wiring diagram for a 1990 ford ranger pickup
If your local Ford dealer hasn't purged the manual the should make a copy of the schematic for you
1,167 views
Usually answered in minutes!
×