Question about 2000 Honda Civic
Why is my cruise main light on and how do i get it off, on honda CRV
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: honda crv engine light
I would go to your local Honda dealership and tell them the engine light came on. They will hook it up to a special computer and they will be able to tell you why the engine light came on and what's wrong with the car. Not sure what the cost will be to get it checked out. If you don't have the money for that right now.
Posted on Jan 23, 2009
you have to go under the bumper and and look behind then look for the back of the lightbalb connection. if you see that. pull on it carefully. if rusted, spray some wd forty on it but make sure you dont get the wires with the wd forty
Posted on Aug 05, 2009
There is a cable reel (clock spring) in the steering column. If it was not centered when you put in the rack than it probably broke.... Is the SRS light on too? This cable reel allows electrical connection to the air bag and the cruise control switch (mounted to the steering wheel), so you can turn the wheel. Its operating range is two and a half turns from center in both direction. When you disconnect the steering coupler from the rack the steering wheel moves, now the cable reel is not centered. If you put it back on in this position and turn the steering wheel fully to one side the cable reel breaks. That could be what happened, however the cable reel is very expensive so make sure that's it before replacing. I recommend performing an input test on the cruise control unit to confirm.
Posted on Feb 04, 2010
The cruise control suddenly stopped working and lites did not come on either, was working fine one day then next day it didnt'. Is there a fuse that might have gone out and if so where is it located?
Posted on Apr 10, 2010
JUST POP SWITCH OUT AND BULB GOES INTO SWITCH USE SMALL SCREW DRIVER TO REMOVE YOU WILL HAVE TO TWIST IT COUNTERCLOCKWISE TO REMOVE, TWIST CLOCKWISE TO INSTALL.
Posted on Apr 21, 2010
Tips for a great answer:
May 11, 2017 | Honda CR-V Cars & Trucks
Jan 16, 2012 | Honda Civic Cars & Trucks
Apr 16, 2011 | 2003 Honda CR-V
May 27, 2017 | 2004 Honda Accord
Apr 21, 2010 | 2006 Honda CR-V
Mar 28, 2009 | 2005 Honda CR-V
Sep 27, 2014 | 2000 Honda Civic
352 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: