Question about 1999 Ford Taurus

1 Answer

Couldn't find the grease fittings on a 99 Taurus station wagon.

The reason is that the car starting to make a grrrroun noise when turn to the right only. I think that by reading what Ed said to the other person about not having the fittings where they supose to be imply that needs to install them, now on this model they should have to have the inlets for the grease fittings to be installed? If so............Thank you Ed

Posted by on

  • mannyrivera Jul 29, 2009

    thanks Mike, maybe I didn't describe the noise correctly, sounds more like a rusty door when trying to force it, that's why I was looking for the grease fittings.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 636 Answers

Grinding noise while turning , sounds more like to me that you need to replace a CV joint. hope this is helpful information.

Posted on Jul 29, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is it possible to lube the steering column on a 1999 Ford Taurus Wagon

where the column goes through the floor there is a rubber boot that could be the area causing the squeak, usually has a clip etc so loosen and pump in some grease and teast

Nov 14, 2014 | 1999 Ford Taurus

1 Answer

Will the ac compressor pulley from a 99 ford

I BELIEVE 90 TO 95 WILL WORK The CHANGE YEAR WAS 96 to 99 and 2000 to 2006 look for one 93,94,or 95 from ebay

Oct 15, 2014 | 1995 Ford Taurus

1 Answer

Will the ac compressor pulley from a 99 ford

Best way to find that out is to ask at a ford dealer repair shop what the part number is for both. If the numbers are the same, there's your answer. The part number may be on the pully.

Oct 15, 2014 | 1995 Ford Taurus

1 Answer

Will the ac compressor pulley from a 99 ford

There is a possibility, but I doubt even a Ford tech would know that off-hand. If you can, get the used pulley, and compare it to what you already have on hand.

Oct 15, 2014 | Cars & Trucks

1 Answer

1999 ford tarus se comfort station wagon it will not start or turn over battery seems to be okay

Have to test or replace battery

Then have to test starter solenoid & or starter

Could be ignition switch or other items in starting system

Nov 23, 2012 | 1999 Ford Taurus

1 Answer

1999 station Wagon.Car not moving foreward nor reverse.Oil level above low level.High pich noise when pres the pedal gas.

Did you check the transmission fluid level? Sounds like you have a converter or a trans. pressure problem.

Jul 27, 2011 | 1999 Ford Taurus

1 Answer

Installing a front struts and springs cant seem to find any to match my ford taurus station wagon 1994 all springs are bigger do you have any advise?

if you have bought the correct springs,then use a spring compressor to "compress the springs"whilst you fit them.

Sep 04, 2010 | Ford Taurus Cars & Trucks

1 Answer

2000 taurus squeakey front end when you turn the wheel

U have a lack of grease issue with the front tie rod ends, if they are greaseable grease them, if no grease fitting replace them

Feb 28, 2010 | 2000 Ford Taurus

1 Answer

Change oil pump 99' Ford Taurus V6-3.0 Station Wagon

does your oil light come on because if your oil light comes on and the the car is cold there is no knocking but when the car warms up you hear the knocking its going to be your oil pump and the oil pump screen

Jul 02, 2009 | 1999 Ford Taurus

1 Answer

Locks go up and down and it beeps


Dec 13, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers


Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides