Question about 1991 Mercedes-Benz 300 Diesel

Open Question

Car will go in drive nad reverse but will not shift into second gear

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

01 chevy duramax not shifting out of first gear and gear indicator flashing when in Reverse and Drive. Pops into reverse for a second then out and Drive will go in but shifts in hard.


Valve body on the transmission is not working. There are shift solenoids attached to it that control it so look for a blown fuse first.

Aug 01, 2016 | Cars & Trucks

1 Answer

Like to find out why transmission will shift in reverse and first but not drive and second will not move in Drive and second gears 1976 Motorhome will drive in reverse and first gear


Because 2nd and third gears use a different clutch pack than first and reverse. It sounds like the 2nd and third clutches are gone.

May 23, 2016 | Cars & Trucks

1 Answer

Won't drive or shift in 3rd gear but will reverse first and second gear


If it won't shift to 3rd and stays in second, bad shift solenoid/s. If it shifts and the transmission drops out(high RPM's), the bad clutches in the transmission. Rebuild. Solenoids around $600 to replace. Transmission rebuild around $2200.

May 06, 2016 | 2002 Buick LeSabre

2 Answers

When shift into 1st or 2nd gear in goes in reverse?


what kind of vehicle is it, i am thinking you have your shift pattern wrong, sometimes reverse is either to the left and down or up, some vehicles the reverse is all theway to right and down, so newer cars the reverse to the left is slightly close to first and second, i dont knowwhat you are driving but the shift pattern on manuals onnewer cars are very close you just need to practice the precise area of reverse and first and second type of car would really help.

May 02, 2016 | Cars & Trucks

1 Answer

Replace shift modulator 1979 cadillac coup deville


The governor likely failed. Not a difficult part to find or replace.

Apr 14, 2014 | 1976 Cadillac Deville

1 Answer

Shifting Problems


when has the last time you had a trans serv. done on it? if you take it to a shop the will tell you that you need a rebuild. thrid gear and over drive are about burned up.

Apr 27, 2010 | 2002 GMC Sierra 1500

1 Answer

Transmission doesn't shift in reverse after it warms up


it is safty in the tranny have it scan

Oct 12, 2009 | 1991 Audi 100

1 Answer

Car won't go into gear properly


it could be a few things bent shifting fork or first gear is out reverse runs off an idler that is conected to first gear.

Jun 05, 2009 | 1999 Nissan Altima

1 Answer

1995 crown vic gear problems/gear shift wont lock


most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

May 30, 2009 | 1995 Ford Crown Victoria

1 Answer

98 saturn no reverse at all seems to shift weak into second gear


2nd gear & reverse share the same clutch.You probally have a loose Input shaft nut that needs retorqued.Located in the endcover of trans.You will need a gasket,fluid & a manual.Re-Torque to 110ft lbs

Apr 27, 2009 | 1998 Saturn SC

Not finding what you are looking for?
1991 Mercedes-Benz 300 Diesel Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...