I need to know how to route the new line because the old line is broken & missing
SOURCE: 89 Chevy Beretta Fuel Lines
how do you know it needs fuel lines, are they leaking? is fuel pump good?did you do fuel pressure test? did you chk. to see if filter is pluged? just because the tank leaks won't keep it from running and that can be fix with a little apoxey and a some elbo grease.
SOURCE: broken line after fuel pump replacement
All the fuel lines in the modern fuel pump in tank vehicles need the 2-3 lines hooked up, so it would be a good idea to do so. Rick
SOURCE: removed the old fan belt. But don't know hos to
LOOP THE BELT UNDER THE CRANK PULLEY, START WITH THE RIGHT HAND AND GO AROUND THE LEFT HAND SIDE OF THE WATER PUMP, DOWN TO THE POWER STEERING PUMP, OVER THE A/C COMP, UNDER THE IDLER PULLEY, OVER THE ALTERNATOR, AND THEN THE TENSIONER.
ITS EASIEST TO SLIDE THE BELT UNDER THE IDLER LAST AND RELEASE THE TENSIONER.
SOURCE: need to know routing
Welcome to FIxYa.com What size engine Please? Thank you for using FixYa.com Regards, Lee Davidian
SOURCE: I need serpentine belt diagram for '01 ford escort ZX2
No Prolem! Look at the pullys on the engine. Notice some are grooved while others are not? The grooved pulleys go on the inside of the belt or the grooved side of the belt, while the smooth pulleys go on the outside or smooth oart of the belt. Works with All belts on all engines!
44 views
Usually answered in minutes!
×