Question about 1997 Toyota Corolla

2 Answers

Can you run a 1997 corolla without the a/c belt

Can you run a 1997 corolla 1.8 without the a/c belt

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 288 Answers

On 1997 Corolla a/c has its own belt. Alternator and p/s each have their own belt too. You can run without the a/c belt, no problem. Obviously, you won't have cold air.

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

Posted on Aug 30, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 2,050 Answers

Take a close look to see if any other pulleys are on that belt. If it's just the A/C compressor, crank pulley, and maybe a tentioner, you can run without it.
Power sterring, the alternator, and water pump must be on a different belt!

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace dome light in 1997 Toyota Corolla?


pry the dome light cover off. remove and replace bulb

Aug 28, 2014 | 1997 Toyota Corolla

1 Answer

97 Toyota corolla changed timing belt, still will not stay running.


Would you give us more informations like:
-The car start and run about... and shut off.
-The car can't strt at all.
-How it did after start.

mai lor

Feb 19, 2013 | 1997 Toyota Corolla

1 Answer

I can not loosen a/c belt tensioner on 1997 Corolla


There has to be a belt adjuster to take the belt out?

Oct 02, 2011 | 1997 Toyota Corolla

2 Answers

Need a diagram for a 99 toyota corolla serpentine belt


  • Here is the serpentine diagram for a 1999 Toyota Corolla with and without AC.

ironfist109_31.gif


  • Thank you for using FixYa

Regards, Tony

Jun 19, 2011 | Toyota Corolla Cars & Trucks

2 Answers

My belt located at the alternator squeeks when i start it for about 30 sec. What can i do to fix it?


The most likely reason for the squeak is that the alternator belt is slipping on the pulley while the alternator is drawing a heavier load trying to replace the charge in the battery used during starting. Tension the belt and that should remove that problem, you might get a bit more squeak for a while because the pulleys are now polished but that should bo away. The belt is correctly tensioned when you can turn the belt through 90 deg. at its longest run, without exerting too much force.

Feb 17, 2011 | 1997 Toyota Corolla

1 Answer

Belt diagram 1997 toyota corolla? alternator belt replacement?


The 97 Corolla has three accessory belts. The alternator belt is the one you see when you look down on the passenger side standing near the front of the engine compartment. If fits over the alternator and the engine pulley. The belt beneath it is the a/c belt (if the car has a/c). It fits over the engine pulley and the a/c compressor. The power steering belt is toward the rear of the engine compartment, on the same side. It fits around the engine pulley and the power steering pump.

Replacing the alternator belt is not too difficult. Standing in front of the car and facing towards the rear, loosen the locking bolt under the right side of the alternator. Then loosen the alternator hinge bolt on top of the alternator. Now you are ready to loosen the alternator belt tensioner adjustment bolt, accessed under the alternator from the front. Turn the tensioner until the old belt is loose enough to remove, then turn it further so that the new belt will go on easily. Replace the belt and re-tension until you have about 1/4 in. to 1/8 in. of play in the belt, tighten the lock bolt and the hinge bolt, and run the engine. If the belt squeals it means you need more tension, but do not overtension. Recheck it after a few days.

Mar 22, 2010 | 1997 Toyota Corolla

2 Answers

I have a 1992 corolla and it will start sometimes.


I'd suggest you should turn on the ignition, and listen carefully to hear if the fuel pump (located in the fuel tank) runs for a couple of seconds. Providing you hear it run, it should start. If it doesn't run, perhaps it is faulty, or its relay may be faulty.
I'm not sure offhand where the relay is located. You may hear it click in and out when you turn the ignition on and off.
The pump should run briefly to ensure the fuel pressure is up.

Jul 02, 2009 | 1997 Toyota Corolla

1 Answer

I need the diagram for the a/c belt for 1995 Toyota Corolla


dont worry, your engine will do fine without your a/c belt. just fasten the tensioner so it will not fall down during your travel

Nov 26, 2008 | 1995 Toyota Corolla

Not finding what you are looking for?
1997 Toyota Corolla Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...