Question about 1993 Chevrolet S-10 Blazer

1 Answer

Need to change alternator on 1993 chev 4wd 4 door blazer engine 4.3 liter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Ok no problem. first off unhook the possitive on the battery. then find the belt tensioner. there should be a sqaure hole in it for a rachet to go into. use the rachet(usually the 3/8's drive)to move the tensioner to where you can slip the belt off the alternator. then remove the nut off the back of the alternator to take the hot wire off. Then there is a plug on the back of the alternator. unplug it. next take the three bolts out of it and remove it. then put the new one on and repeat steps in reverse. If you have problems with how the belt goes back on then look around the engine bay. usually there will be a sticker with how it goes.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 isuzu pickup truckCan someone put a 3.1 liter 6 cylinder motor in a 1993 4wd pickup that came stock with a 2.6 liter 4 cylinder?


problems will be with the longer engine and radiator clearance and the bell housing mounting bolt holes and engine mount positions. You may need and adaptor plate on the block to fit the gear box. It would be worth pursuing the idea but prepared to spend some dollars to accomplish it.

Nov 16, 2013 | Cars & Trucks

2 Answers

Where is the electric fuel pump located on a 1990 S 10 , 4wd , 2 door Chevy Blazer ? ( 4.3 liter engine )


In the fuel tank.That is where it is, on 99% of all
vehicles made in the last 30 years!!

Nov 29, 2010 | 1990 Chevrolet S-10 Blazer

1 Answer

Where is the computer on 93 blazer s10 how do you change it


For 1993 Chevrolet Truck S10 Blazer 4WD 4.3L CPI 6cyl the Engine Control Computer is located in front seating area, passenger side, behind dash, above glove compartment cavity, mounted on dash upper panel.

Hope this helps (remember to rate and comment this).

Sep 27, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

I have a fullsize chev. blazer that is trying to


if you have the push button style try changing the switch (buttons). i've seen this happen before to my truck.you can get them cheep at any local junk yard

Mar 03, 2010 | 1993 Chevrolet K1500

2 Answers

1993 Chevy S10 Blazer engine hesitation with smoke from exhaust


Had a 94 Olds Bravada that did a similar thing and it was EGR valve on the front of the intake. It' s easy to take off and clean with WD 40 and if you have an air compressor blow it out good.

Dec 19, 2009 | 1993 Chevrolet S-10 Blazer

3 Answers

How much transmission fluid does a 1999 subaru Legacy BH need


automatic trans 2.2liter engine- 1990-1993/ 8.8 qts.
1994-on/ 8.4 qts
2.5 liter engines 10 qts. all years

manual trans 2.2 liter 2wd 1990-1994 3.5 qts
1995 2wd 3.7 qts

4wd 1990-1994 4.2 qts
4wd 1995 on 3.7 qts2.5 liter aall years 3.7 qts.

Jan 25, 2009 | 1999 Subaru Legacy

1 Answer

Chev Blazer


sounds like your transfer is going bad... get rid of it quick or it's going to cost you a lot of headaches and money
good-luck ray

Dec 18, 2008 | 1993 Chevrolet S-10 Blazer

3 Answers

Transfer case motor for push button 4x4


i have a 1993 blazer 4.3 w code 4x4 with a 4L60 E . my truck wouldn;t go in 4 hi or low. so i changed the transfer case motor and it works fine now. If you turn the ignition key to on but not crank the engine and open the driver door and push 4 hi button, you should hear the transfer case motor cycle for 3 or 4 seconds every time you push button and the light will flash until it goes in 4wd If the 4 hi button light doesn't flash during cycle then it could be a bad switch. if the transfer case motor won't cycle it could be a fuse or a bad transfer case motor . Hope this answers your question.
pgale89

Dec 16, 2008 | 1994 Chevrolet S-10 Blazer

2 Answers

1999 chev blazer 4x4 system


I have a 1999 chevy blazer that stuck in 4 wheel drive. How do you get it out.

Nov 23, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1993 Chevrolet S-10 Blazer Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...