Question about 1991 Jeep Cherokee Limited

1 Answer

Front end shakes when braking

Put new brakes rotors pads drums brake lines bearings still shakes 1996 f 250 4x4

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

One or both of your new rotors probably have some run-out in them.Not entirely unusual to have warped rotors right out of the box.I would check this before considering other things. machine rotors....good luck

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

Why does it shake whenever i let off the gas and shakes real bad when i apply my brakes


If when applying the brakes the steering wheel shakes then your front rotors are warped and at the least need resurfaced and most likely the brake pads replaced. But more likely the rotors are too thin which has allowed them to overheat and warp which causes the shaking. In this case new rotors and pads are in order. If when braking tou feel the shaking in the seat of your pants then most likely the rear brakes are the issue. Same problem as the front, warpage, but your rear brakes are most likely drums. Again, possible resurfacing and new shoes; but more likely new drums and brake shoes.

But I wonder? Did this vibrating just start all of a sudden or maybe after a near accident requiring you to brake very heavily and possibly overheat the brakes. Or my main concern, to keep this from happening again, after pulling some type of trailer that you intend on pulling again. Pulling a trailer without its own brakes puts a much heavier load on your trucks brakes and just repairing them won't keep it from happening again if you ARE pulling a trailer. Higher quality rotors/pads/drums/ and brake shoes can help but if the trailer is too heavy for the truck nothing but installing brakes on the trailer or a lighter trailer will stop you from warping them again.

Lastly, in general when you let off the gas and the whole vehicle shakes the driveshaft/u-joints are common causes. Same with the steering wheel if it shakes when letting off the gas, but only on a 4x4 or AWD vehicle. So check your driveshafts and u-joints and make sure they are tight. But unless you find something obvious there I would wait until you have the brakes sorted out and see if that doesn't stop all the shaking.

Good luck!

Jun 24, 2014 | 1995 GMC Jimmy

1 Answer

Uplander shake when braking at speed > 60mph


you have a rotor that needs turned or replaced,it is out of true from heat,hopefully when pads were put on the caliper slides were cleaned and greased

Nov 23, 2012 | 2007 Chevrolet Uplander

1 Answer

Brake shoes on 1987 f250 460 1987 2 wheel drive how to replace


Lift the front of your Ford F-250 off of the ground using a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench to prepare the truck for servicing. 2 Open the hood on the engine compartment and take the lid off of the master cylinder that bolts to the brake assister on the driver's side firewall.3 Remove the hex-head bolts on the back of the brake caliper with a socket. With the bolts removed, pull the caliper off of the Ford's brake rotor.4 Pull the old brake pads out of the caliper and discard them. Squeeze the brake piston back into the backside brake caliper with pliers, and then insert the new pads into the brake caliper.5 Pull the rotor cap cover off the middle of the rotor with a screwdriver and use a socket to remove the nut located behind the cover.6 Pull the rotor off of the wheel spindle.7 Remove the old wheel bearings from the brake rotor and insert them into the new rotor. If the old wheel bearings are worn, replace them with new bearings.8 Slide the new rotor onto the wheel spindle and secure it using a bolt and socket. After you tighten the bolt, press the cover back onto the rotor.9 Place the caliper on the rotor and secure it with a socket and hex-head bolts. 10 Duplicate the process on the passenger side of the F-250. 11 Close the master cylinder after putting the wheels back on the Ford and lowering it to the ground. Press on the brake pedal to seat the pads against the rotor
Replace the F-250's Rear Brakes 1 lift the rear of the Ford F-250 off the ground with a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench.2 Place a strip of paint on the back of the brake drum and rear brake drum cover so you can position the brake drum orrectly when you put it back on. If you plan to install new brake drums on your Ford F-250, skip this step. 3 Place the brake drum puller on the brake drum and pull the drum from the wheel hub. The method for attaching the brake drum puller depends on the brake drum puller that you use. 4 Remove the springs that attach the brake shoes to the wheel hub by pulling them off with pliers.5 Lift the old brake shoes off of the wheel hub and place the new brake shoes on the wheel hub. Secure the new shoes with the springs.6 Pound the brake drum onto the axle hub with a rubber mallet.7 Duplicate the process on the passenger side of the Ford.8 Put the wheels back on the F-250, lower it to the ground and, then press on the brake pedal to seat the shoes against the brake drum.

Oct 14, 2011 | 1988 Ford F 250

3 Answers

WHy dose my brake pedal push back and make a grinding noise


Look through the openings in your front wheels and look at the front rotors-are they gouged up? You are probably running metal-to-metal, pads to rotors.
Chances are real good your rotors will have to be replaced along with new pads, but if you catch it early enough you might be able to have them machined, although nowadays that is hardly easy to get done and the savings usually is not as significant as it once was.

May 23, 2011 | 1995 Pontiac Bonneville

2 Answers

Front end shakes when braking


will try to help. when front wheels shake while applying brakes and you can feel shake in steering wheel, front brakes and rotors need replacement.rotors are warped,if you replace front brake pads, it will return[shaking when you apply brakes] suggest that you replace front rotors[both] replace [both]front brake pads. cost? i would charge [brake pads cost $55.00] labor,$60.00] total $115.00 thank you for choosing fixya.com

Dec 04, 2010 | 1998 Ford Windstar

4 Answers

What is brake lining? it shows on my warning light.


you need to have new pads and rotors installed,the rotors is where your vibration is coming from

Jan 15, 2010 | 1995 BMW 7 Series

4 Answers

Where do you put the brake fluid on this car? Because, my car is making a grinding sound when I put my foot on the brake.


The grinding noise probably means you need to put new brakes on. If you fill the brake fluid reservoir, and then change the brakes, the new fluid will run out anyways, because the new brakes will have to be put in, and the fluid will run out.

Oct 01, 2009 | 1991 Dodge Spirit

1 Answer

1997 Mercury Sable thumping in front end


try to replace the wheel bearings.

Jun 17, 2009 | 1997 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...