Question about 1995 Toyota Camry
1. locate the oil filter which is usuallu near the motor oil guage.
2. get a wrench and slowly unscrew the oil filter pulling the rubber along with it.
3. get a new oil filter put a little bit oil around it and then screw it back along with the rubber.
4. Thats it.
Posted on Aug 03, 2009
You need a 17 mm socket 1/2" to loosen the top banjo bolt. 14mm flare with 3/8 extension up from the wheel well for the bottom. 10mm for the mounting to the car. It is under the air filter. Sometimes these bolts can be very tight. It is imperative that you dont strip the bottom one. That is why the flare is a must.
Posted on Jul 30, 2009
Just a cresnt its the black box were the big black pipe is jst take the filter out
Posted on Jul 29, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 10, 2012 | Ford F-150 Cars & Trucks
Mar 24, 2012 | 1997 Ford Explorer AWD
ou need a special tool to remove the fuel lines on your vehicle. Fortunately Ford had the wisdom to provide it to you. Here's how to do it.
Warning: because of the combustion characteristics of gasoline, always use extreme care when removing and installing any fuel system component or personal injury or damage to the vehicle may occur.
Mar 25, 2011 | 1998 Ford Windstar
May 29, 2010 | 1995 Ford F350
Nov 16, 2009 | 1996 Buick Skylark
Nov 05, 2009 | 2001 Ford F150 Styleside SuperCrew
Oct 10, 2009 | 1996 Mercury Grand Marquis
Jul 12, 2009 | 2004 Ford Econoline
Apr 02, 2009 | 2005 Ford Excursion
650 people viewed this question
Usually answered in minutes!