Question about 1991 Jeep Cherokee Limited

2 Answers

Ont end shakes when braking have new pads rotors calipers bearin

New brake lines and rear drums i brake and steering wheeld pedal shake

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Sure sounds like your front disc brake rotors need to be resurfaced.
Also, if it was not doing this before the rear brakes were done, but started immediately afterward, the rear drums need to be turned (resurfaced) also. This will be true even if they were new! When the new drums are stored in the parts store or warehouse standing upright rather than flat, they will warp and therefore need to be turned.

Posted on Jul 29, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Your rotors are warped

Posted on Jul 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

Why does it shake whenever i let off the gas and shakes real bad when i apply my brakes


If when applying the brakes the steering wheel shakes then your front rotors are warped and at the least need resurfaced and most likely the brake pads replaced. But more likely the rotors are too thin which has allowed them to overheat and warp which causes the shaking. In this case new rotors and pads are in order. If when braking tou feel the shaking in the seat of your pants then most likely the rear brakes are the issue. Same problem as the front, warpage, but your rear brakes are most likely drums. Again, possible resurfacing and new shoes; but more likely new drums and brake shoes.

But I wonder? Did this vibrating just start all of a sudden or maybe after a near accident requiring you to brake very heavily and possibly overheat the brakes. Or my main concern, to keep this from happening again, after pulling some type of trailer that you intend on pulling again. Pulling a trailer without its own brakes puts a much heavier load on your trucks brakes and just repairing them won't keep it from happening again if you ARE pulling a trailer. Higher quality rotors/pads/drums/ and brake shoes can help but if the trailer is too heavy for the truck nothing but installing brakes on the trailer or a lighter trailer will stop you from warping them again.

Lastly, in general when you let off the gas and the whole vehicle shakes the driveshaft/u-joints are common causes. Same with the steering wheel if it shakes when letting off the gas, but only on a 4x4 or AWD vehicle. So check your driveshafts and u-joints and make sure they are tight. But unless you find something obvious there I would wait until you have the brakes sorted out and see if that doesn't stop all the shaking.

Good luck!

Jun 24, 2014 | 1995 GMC Jimmy

1 Answer

What makes it shakes


Sounds like bad brake pulsation, meaning warped rotors. When rotors are warped , they push the caliper piston in and out ,causing the brake pedal to pulsate and shake the steering wheel. I would start with replacing the front pads and rotors, and if you have drum brakes in the rear, have those cleaned and adjusted for a more balanced braking system.

May 15, 2014 | 2001 Plymouth Neon

1 Answer

My car shakes when I used the brakes KIA Rondo 2007


rotors out of round calipers sticking drums oval you should start by removing the front calipers and check if they are working and sliding properly then check the rotors if blue or rusted that should solve the problem for a brake job at this time you might take off the rear as well and check the same if are drums or discs for drums you need to check the wheel cylinders for working if rotors then same thing but before doing all this does the steering wheel shake or the pedal if not sure try handbrake upon braking to see if the rear is the problem or the front

Apr 04, 2014 | 2007 Kia Rondo LX V6

1 Answer

My 2002 Toyota Avalon is shaking when I apply the brakes. I have replaced the front and rear brake pads and the front rotors with Raybestos ones. It still shakes. Could the rear rotors be warped?


That's what I would imagine. It is usually the front rotors that warp due to the fact that they work a little harder than the rears. However, rear rotors can warp. If you feel the shake more in the body of the car, so in the seat and you feel like the whole car is moving and the steering wheel stays mostly calm then I would imagine the rear rotors are warped. However if the shaking is felt mostly in the brake pedal and the steering wheel shakes too then it is probably your front rotors. Shops can usually resurface rotors and it may be cheaper than buying new, so that could be an option for you.

Apr 08, 2011 | 2002 Toyota Avalon

2 Answers

Front end shakes when braking


will try to help. when front wheels shake while applying brakes and you can feel shake in steering wheel, front brakes and rotors need replacement.rotors are warped,if you replace front brake pads, it will return[shaking when you apply brakes] suggest that you replace front rotors[both] replace [both]front brake pads. cost? i would charge [brake pads cost $55.00] labor,$60.00] total $115.00 thank you for choosing fixya.com

Dec 04, 2010 | 1998 Ford Windstar

3 Answers

2007 camry brakes vibrating


Installing new brake pads on toyota camry solara 2006 front rotors and pads and rear pads. Steering wheel would shake while breaking on 50+ miles per hour speeds. All fixed now.

Jun 22, 2010 | 2007 Toyota Camry

3 Answers

When i hit the brakes or go over 60 miles the wheels will start to shake


It sounds like you may have more than one problem here. First I would investigate Front End Alignment and ALL Steering/Suspension components for excessive wear and/or looseness. Second I would Inspect the Brake Rotors and Pads for uneven wear. Third I would check the Tires for uneven wear and balance. Many things can cause these symptoms: Worn out Ball Joints, defective Shock Absorbers/Struts. Worn out Tie Rod Ends, Idler Arm, even the Steering Gear Box can be part of the problem. Brake Rotors and Tires can be out of Balance with either one causing the problem over 60 MPH. I strongly suggest having your vehicle inspected by an ASE Certified Front End and Brake specialist immediately. It is very dangerous to drive a vehicle with these symptoms.

Dec 12, 2009 | 2004 Saturn VUE

2 Answers

Bmw 316ti shuddering when applying brakes


This condition indicates warped rotors. You will need to remove the rotors and have them turned on a brake laythe. Since you will have the calipers off, go ahead and replace the pads...its an inexpensive maintennance item. Good Luck, Hope this is helpful.

Nov 10, 2009 | BMW 318 Cars & Trucks

1 Answer

1997 Mercury Sable thumping in front end


try to replace the wheel bearings.

Jun 17, 2009 | 1997 Mercury Sable

3 Answers

When appling brakes on a 2000 Jeep Grand Cherokee, steeing wheel


New revised calipers. and have the new rotors machined right out of the box before installing

Dec 28, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...