Question about 2002 Ford F250 Super Duty SuperCab

2 Answers

It like its a shock but they are new

I have a raddle in the front end it like its a shock but they are new and it happens when you hit a bump

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    Have you checked brake pads & calipers for play? Does it sound up high, down low at wheel?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this problem and had to replace the stablizer bushing on the stablizer arm..............Truck has 80 K miles on it..........This took care of the problem

There are 2 of them........$79 each

Posted on Aug 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 636 Answers

Break caliper pins are worn and rattling .

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford truck bounces hitting a bump


Have you cked the bushing lower and upper

Mar 03, 2013 | Cars & Trucks

1 Answer

Front end Vibration is felt when I hit a bump in the road and it stops when I hit another bump in the road, why is this happening


You need to get this checked out immediately. You are most likely looking for worn out tie rod ends, ball joints and the rest of the steering assembly depending on what you are driving. It is also likely to be a combination of bad parts so make sure shocks or struts and control arm bushings are checked as well.

If you are driving a jacked up truck with 33" or bigger tires it could also be the infamous "death wobble". There's a reason they call it that and you will need to get stabilizers attached to the drag link to eliminate it. They look like long shock absorbers and mount between the frame and the drag link. Hope this helps.

Feb 21, 2012 | Cars & Trucks

2 Answers

I have done shocks bilsteins front sway bar eibach brakes diff gasket and cover performance stering stablizer all tie rods all 4 bALLJOINTS NEW 20 INCH RIMS AND BRAND NEW TIRES FUTERA GOODYEARS 3 DIF...


I can think of two things not easily seen that can cause a banging when hitting small bumps;
The sway bar end links could be loose or broken.
The rear shock bolts, the lower bolt that holds the shock onto the rear axle, I've seen that mounting hole down there get enlarged, allowing the shock bolt to move about when hitting small bumps, causing a banging sound.
Check those two things out.

Sep 09, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I have a1996 town country everytime i hit a little


right font shock absorber /mc pherson strut,or shock bushes.

Jul 07, 2010 | 1996 Chrysler Town & Country

2 Answers

Steering wheel shakes when i hit bumps


Bad shocks will cause the front jump around. Also check the tires for uneven wear.
The entire front end should be looked over if the shocks are bad you may also have other parts worn as well.

Jul 08, 2009 | 1998 Ford Explorer

1 Answer

Clunk or rattle in front end purchased car new never smashed only happens when you hit bumps


You should check your front end, ball joints and tie rod ends for play. To do that jack the car up and set in on blocks so the front wheel hangs free. Grab the tire at 12 o'clock and 6 and try to move it in and out. If the wheel moves you have a bad ball joint, a helper to watch while you move the wheel will tell you upper or lower. Do the same at 9 and 3 to check tie rod ends. Again movement will indicate a bad tie rod. Check for inner or outer. Look at your shocks for signs of leakage. Aleaky shock could also make a clunk.
If everything appears to be tight then remove a wheel and look at your brakes, A loose caliper, pads flopping. Pads should only move in and out to the rotor and the caliper shouldn't move by hand. Hope this helps.

Jul 05, 2009 | 2006 Chevrolet Cobalt

2 Answers

Front end of my 87 jeep cherokee shakes bad when i hit a bump


May check your ball joints and tie rods. Also could be your shocks.
Does it seem like its more shaking on the left or right? or even?

Feb 24, 2009 | 1987 Jeep Cherokee

1 Answer

Front end of truck makes a popping sound when hitting dips slow


make sure your new shocks(bolts) are cranked down tight. i left one slightly loose, and it knocked like the bad ball joint i already changed.

Nov 13, 2008 | 1989 Chevrolet C1500

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...