Question about 2003 Chevrolet TrailBlazer

3 Answers

Driver side wheel makes noise, it gets more rapid as I go faster

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

There are a few reasons why a wheel will make noise when it's rotating. The most serious would be a bad wheel bearing. I would have the front wheel bearings checked, and if the driver's side needs replacement, I recommend that you have the passenger side replaced as well.
Other less serious causes for a noise at the wheel can be a small stone stuck inside a hub cap or a stone lodged in the tire tread.

Posted on Jul 29, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Sounds like a slack or worn bearing....when car is at a standstill, hold the wheel that the noise is coming from at the top, and push and pull, if it moves or makes a clunk noise, then the bearing is worn...

Posted on Jul 29, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Hi, it can be a number of two things....
1, the wheel nut are loose and need tightening.
2, the wheel bearing needs tightening or needs replacing.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dodge Grand Caravan is making a humming noise as you accelerate, while turning left it stops but gets worse while turning right. I replaced the left front wheel hub and no improvement, I need help


if hub bearing replacement did not fix the noise

when noises are on left and right turns
that has CV joints /drive shafts
would say they are the issue
replace both sides

and replace the left hand hub bearing at the same time


26319284-yxyoopazoqpslmdxp0iioobb-4-0.jpg

26319284-yxyoopazoqpslmdxp0iioobb-4-1.jpg

26319284-yxyoopazoqpslmdxp0iioobb-4-3.jpg

Oct 20, 2016 | Dodge Caravan Cars & Trucks

2 Answers

Clicking noise from drivers side only when driving


Hi there, this could be your cv joint on that side, a good test is to put steering on full lock and go in reverse, if the noise is there then I would say it's you cv joint, cheers

Feb 19, 2014 | 2000 Dodge Neon

1 Answer

I have a grinding noise coming from, what sounds like to me, the front passenger side tire. you will hear it as you as you gain speed, and the sound basically gets louder and faster, the faster you go....


Change both front Wheel Hub Bearings

You know the left is bad, so why tells us
change it

The brake wear is from not doing brake work
often enough,no rust removal,no lubing of of
any moving parts

The right side was basically rusted & frozen in place
& not releasing,the repair shops don't do much in that
area,need to do your own work

Take brakes apart once or twice a year

Sep 15, 2013 | 2006 Ford Fusion

3 Answers

Whining noise progressively gets louder with speed


One wheel turning faster than the other is normal if both wheels are off the ground. If one wheel is dragging when the other wheel is on the ground, it could be brakes or a wheel hub bearing.
Usually if the noise happens on right turns, the left hub bearing is failing, and vice versa.

May 07, 2013 | 2000 Buick LeSabre

1 Answer

I went offroading last night and now there is a clunking sound coming from the passenger front side of my 1994 Chevy K1500. What could this be?


look under for debris or bent or damaged components jack up truck if loose or making noise check shocks [2] move[push against] tire up and down if loose check upper and lower ball joints[3] --push side to side if loose check tie rods steering components [4]spin wheel look for damage by cv axle or[5] if noise behind wheel possible hub [wheel bearing damage remove wheel and inspect hub

Apr 14, 2013 | 1994 Chevrolet K1500

1 Answer

When front end is jacked up should both wheels turn at the same speed


Yes that is normal for a front wheel drive vehicle. The power is applied to the wheel on the passenger side only until a given amount of wheel speed is obtained then the drivers side will spin at the same rate. Although if you raise the front of the vehicle and spin the tires by hand in neutral you should feel equal resistance. If the driver side wheel has excessive resistance to turning the wheel bearing may be to tight..

Aug 23, 2012 | 2001 Kia Spectra

1 Answer

Ticking noise driver side wheel, the faster you go the faster the tick


ticking alone is usually the sign of a failing wheel bearing. get both sides done at the same time as the other will start to fail soon too.

Apr 20, 2011 | 2009 Chevrolet Cobalt

1 Answer

I have a knocking sound on the drivers side of my 1995 Ford Aerostar. The knocking becomes more rapid with speed. There is no shaking in the wheel. Are there any diagrams which can help explain your...


It sounds like your CV joint I don;t have anything that would be spcific as far as a diagram gose for your vehicle But you could go to a ford dealer and ask for a print out from there manuals then you;ll have a specific detailed diagram CVjoints are ware parts and need to be replaced from time to timeand from what you have discribed the faster you go the more rapid the noise becomes and you would;nt get any wheel shake because the drive axle from the joint rides inside the hub on a splein and dosn;t affect the stibilty of the wheel

Nov 09, 2010 | 1995 Ford Aerostar

3 Answers

My car makes a bad growling noise. Everyone said that it was a front wheel bearing because that tire was worn down really bad on the outside. I replaced the passenger front wheel bearing, and it is still...


WHEEL BEARING USUALLY STARTS MAKING A ROARING TYPE NOISE WHICH USUALLY GETS LOUDER THE FASTER YOU DRIVE, SOMETIMES THEY WILL BE LOOSE , TO CHECK JACK UP THAT WHEEL AND GRAB TOP AND BOTTOM OF TIRE AND SHAKE, IF THERE IS MOVEMENT, TRY TO GET SOMEONE TO ROCK TIRE FOR YPU AND WATCH WHERE AXLE GOES INTO CENTER OF BEARING AND SEE IF AXLE IS MOVING WITH TIRE MOVEMENT AND SPINDLE REMAINS STATIONARY, THEN IT IS BAD BEARING, OR SOMETIMES THERE WILL BE NO MOVEMENT, THEN BLOCK REAR WHEELS AND RUN CAR WITH THAT WHEEL IN AIR AND SEE IF YOU HEAR NOISE, GOOD LUCK.

Mar 20, 2010 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2003 Chevrolet TrailBlazer Logo

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...