Check this post with the torque specs from fixya.
http://www.fixya.com/cars/t26764072-intake_manifold_torque_1997_sable_v6
SOURCE: i need 1998 toyota avalon intake manifold torque
11 ft lbs(lower plenum) 32 ft lbs(upper plenum)
SOURCE: need head bolt, intake manifold, and exhaust torque specs
Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks
SOURCE: i own a mercury sable v6 i want to replace the freon
The port closest to the firewall would be the low side where you charge the line with R134 refrigerant. Use gloves and clear goggles to protect your eyes and skin when connecting. The quick connect fitting will ONLY fit on the low side so you can't connect it to the wrong connector (size won't match if you select the high side near the front of the car).
Place the AC on MAX while you charge the system. I recommend purchasing a quick fill kit that has the gauge built into the charging line so you can see the pressure when you let off the trigger. Don't let it approach the red or system will stop working (overcharging the line is not good) These can be purchased at auto parts stores and department stores.
140 views
Usually answered in minutes!
×