Question about 1983 Chevrolet K1500

2 Answers

I NEED AN IGNITION WIRING DIAGRAM FOR A 1979 CHEVY LUV 4/4 AS I AM HAVING A PROBLEM WITH THE WIRING FOR THE VOLTAGE REDUCTION OF 6 VOLTS TO POINTS

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

1979 Chevy luv 1.8 everytime I turn on the lights running light fuse blows, everything else work, lights, turn sin.

Posted on Jan 29, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Don't remember seeing 6v there. You likely could use a ballast resistor like the ones used on older chrysler cars, right in the positive feed to the coil if you need more, string two together. resistor, plus the internal resistance in coil should be enough.

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring diagram of a 1960 ford f-100 6 cylinder ignation coil


I don't have wiring diagram for that year.
I don't mind talking to you.
The positive side of the coil gets voltage from ignition switch, the negative side of the coil goes to distributor and ignition points on a points type system.
Some makes and models, when cranking, everything gets full battery voltage. When it starts and you release the key it springs back to the run position. In the run position, voltage to the coil may go through resistor block or resistor wire, the purpose is so the points on a points ignition doesn't have to deal with full battery voltage all the time. Helps the points last longer.
Just my opinion.

May 30, 2017 | Ford Cars & Trucks

1 Answer

Hi, looking for a ECM wiring diagram on a Chevy Captiva 3.2 2007. Please


Your question is a little broad. Can you tell us the problem? If your having a problem with ignition or fuel system, something like that, I can help with wiring diagrams. If you need voltage and ground for pcm, I can't help with that. Can you narrow the problem down, a little?

To post a diagram of every little wire that comes off the pcm and show where it goes, is too much for me.

Sep 20, 2016 | Chevrolet Captiva Cars & Trucks

1 Answer

Spark plug wiring diagram for 05 tahoe


Greg Bernett 2821 Solutions February 14, 2010
You didn't post your engine size so please pick the applicable diagram:


37926a4.gif
1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise


8c292b0.gif
1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise



30ced3d.gif
4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise


de67664.gif
4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)


bf80c63.gif
5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Source: spark plug wiring diagram for 98 tahoe

  • avatar15.jpg
    ledsled378 2926 Solutions July 24, 2010

ebe6e34.jpg
01f93b7.jpg ..............................

Source: Need diagram for spark plug wiring for 1997 Chevy

Testimonial: "Thank you for your prompt response. Saved my husband from some distress!"
Was this solution helpful? Yes No

  • avatar1.jpg
    Dennis Weid. 44272 Solutions September 16, 2008

This was all I could come with, hope it helps.



ebead53.gif

Feb 27, 2013 | 1998 Chevrolet Tahoe

1 Answer

Heater fan not working in a 1996 Chevy S-10


I looked at wiring diagrams at bbbindustries: the orange wire to the 20 amp htr fuse is direct from the ignition switch. You might check: that orange wire splices to the 10 amp brake fuse (fuse #12). check if that also has any voltage problems.
There are two black fusible links that supply power to the ignition switch. the fusible links come from the battery junction block.

May 26, 2017 | 1996 Chevrolet S-10 Pickup

2 Answers

Just finished 12 volt conversion on 49 V8 flathead. Starter engages but engine won't start. Appears to be getting fuel.


You might not have spark as the 12 volts needs a ballast resistor or the points burn out preytty quick. 8 volts at the coil in run with the points open and 0 with the points clsed and battery voltage at the coil when cranking. coil wire near the intake manifold while cranking should jump at least 2 inches. Closed points should be 0 volts at the neg on the coil. pos and neg should be the same 12 volts with the points open. if not either the coil or the points are bad. The condenser can fail and no spark with all the rest right

Oct 12, 2009 | 1991 Plymouth Colt

1 Answer

I'm not getting a spark in my 1979 chevy luv 1.8 litre.


check distributor, cap, wires and plugs, battery, points if it has them and your coil.

Oct 07, 2009 | Isuzu Pickup Cars & Trucks

1 Answer

Chevy G20 1985 wiring (charging problem)


http://wareznuke.com/apps/3872/all-1979-2007-vehicle-wiring-diagrams-v42-rapidshare-warez


Jul 07, 2009 | 1985 Chevrolet Sportvan G20

2 Answers

Ignition Wiring Schematic


Check with npd.com (nationl parts depot) They have what you need.
bluesryder@live.com

Apr 08, 2009 | 1979 Pontiac Firebird

1 Answer

Need wiring diagram '70 Chevy 2T trck w/electronic ignition conv


Make sure you give it a good tune up. Make sure that your rotor is moving when you crank it over. If it is moving then you will need to replace the distributor module.

Mar 31, 2009 | 1979 Chevrolet C/K 3500

Not finding what you are looking for?
Cars & Trucks Logo

1,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...