1993 jeep grand cherokee is stuck in second gear, the overdrive button is not functioning, and getting the data control center says service 4wd switch
wow no engine size stated, the 5.2L run a special trans... so....
hopeless to help you much.
zj jeep with automatic.
it didnt lie, it told you to service it, so take it to a shop and let the work on this old dog..
stuck , now what does that mean.
the shift lever lever stuck, or its cable failing end to end.? or?
or shifts from 1 to 2 and hangs there.
or down shifts from 3 to 2 and and hangs there
DIY ? question is that it? you never said intentions.....
so we open the 93 ZJ book and what do we see.
ax-15 stick box, seems not.
the aw-4 auto , electronically shifted with TSM (scan it yet?)
and the 46RH auto. used on the 5.2L, has no TCM brain.
its a Hydramatic.
here are the OD words off the 46h page
Overdrive Control Switch
The overdrive control switch is located in the instrument
panel. In the On position, automatic shifts
into fourth gear overdrive will occur. In the Off position,
the switch overrides the powertrain control module
preventing a shift to overdrive fourth gear range.
The switch has an indicator light that illuminates
when overdrive is turned off. The switch also resets
when the ignition key is turned to the OFF position
so that the automatic overdrive feature is restored.
The use of fault codes is employed to help diagnose
the electronic components that operate the overdrive
unit and torque converter clutch.
Jul 16, 2016 |
1993 Jeep Grand Cherokee