How to replace 2003 Mitsubishi Galant ES service engine soon light bulb

Marvin

• 85242 Answers
• Posted on Nov 21, 2008

SOURCE: service engine light

You need to have the system tested for trouble codes, Kragen auto and othes do this for free, post the trouble code back here on this thread.

SOURCE: 2003 MITSUBISHI GALANT HOW TO REPLACE HEADLIGHT BULB

First you disconnect the 3 prong electric plug. To disconnect squeeze the side tabs together (hard) and pull away from the bulb, then you can pull off the protective rubber covering, (its a little snug so give it a tug from the 2 tabs on the top and bottom).

Next unscrew the little Phillips head screw to loosen the bracket that clips in the bulb (take note of how the clip is installed before you remove it, it holds the bulb securely in place).
Just loosen the screw as you do not need to remove it all the way. Pull out the old bulb and replace it with the new one.

The bulb has 3 spacing tabs on it so it can only go in one way. Make note of this when you remove it so you may replace it the same way. follow the steps in reverse and your done.
Note: The little wire clip that holds the bulb in can be a pain. Make sure you get a really good look at it, since it pops out as soon as you loosen the screw. If you get lost, you can always look at the other headlight. Oh, and don't do this in the dark.

SOURCE: how do I reset the service engine soon light?

two ways you can do it. First it would be best to find someone with a code reader to find out what the code is ,some times aout parts stores will check the code for you and maybe even clear it for you.otherwise unhook one of your battery cables for a little while and the check engine light will go off untill what ever set it off sets it off again note unhooking the battery will clear your radio stations

SOURCE: 2004 mitsubishi galant service engine soon light

my galant does the same thing i was told its the 02 senors

SOURCE: diagram for serpentine belt on a mitsubishi galant es

My sincere apologies for the severely delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.

I do not know if you still need this information, but I am answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2002/make/mitsubishi/model/galant/2002_mitsubishi_galant_drive_belt_routing_diagram.htm