Question about Hyundai Motor 2002 Elantra

1 Answer

A/c on my 02 hyndai elantra shuts down after approx.10 minutes of

I have installed new a/c compressor,condensor,high pressure cut off switch,a/c relay,and new ecm.

Posted by on

  • 1 more comment 
  • etalhc Jul 30, 2009

    the orfice has been repalced

  • etalhc Jul 30, 2009

    the orfice has been replaced.we installed new temp sensor and found out that the engine was actually running hot.radiator appeared to be blocked-the top tank was hot,the bottom was cold.new radiator later-still have hot running problem which is cutting off ac when temp climbs.

  • etalhc Aug 13, 2009

    we finally found a faulty temp sensor switch which showed normal temp at the guage.after replacing this sensor the guage started to read correctly and we found we did indeed have an overheating problem which kicked the compressor out at about 220 degrees.we found a faulty thermostat and after replacing the thermostat the a/c worked fine.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Did you change the orfice tube(in line filter)?

Posted on Jul 28, 2009

  • Leonard Williams Jul 30, 2009

    Have a pressure test performed using the radiator to see if you have any leaks on the water cooling part of your engine.This is going to take a little while.Lets try.It certainly would be a lot easier if I had the car in my care.However let try.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a/c diagram for 96 mazda 626 lx 2.0 liter engine


if you are asking about the high pressure cut off switch; it would either be insatlled on the compressor itself or on the high side pressure line ussuallly in route to the condensor (looks like second radiator)....

Aug 18, 2012 | Mazda Cars & Trucks

1 Answer

Location of ac high pressure cutout switch on a 97 Plymouth voyager. Could it be a different problem? Had to replaced the PCM and a couple sensors because of a short in the wiring cluster. Now the ac...


HIGH PRESSURE CUTOFF SWITCH LOCATED ON AC COMPRESSOR DISCHARGE LINE LEADING TO THE CONDENSOR.THE HIGH PRESSURE CUTOFF SWITCH WILL CUT OFF THE AC COMPRESSOR IF SYSTEM PRESSURE RISES TO HIGH CAUSED BY RESTRICTION IN THE REFRIGERANT CIRCUIT OR OVERHEATED CONDENSOR.MAKE SURE COOLING FAN IS RUNNING WHEN THE AC SWITCH IS ON.THE COOLING FAN KEEP CONDENSOR COOL, IF COOLING FAN DONT RUN.YOUR AC WILL STOP BLOWING COLD AIR.HAVE THE REFRIGERANT SYSTEM CHECK OUT.MAKE SURE YOUR LOW SIDE PRESSURE IS 10 - 37 PSI. THE HIGH SIDE PRESSURE SHOULD BE 112 - 210 PSI. CHECK THE AC COMPRESSOR CLUTCH FUSE AND RELAY.

Jul 29, 2011 | Plymouth Voyager Cars & Trucks

1 Answer

1997 jetta ac works for one minute then warm air blows


check the refrigerant level. The compressor is running until the low pressure or high pressure switch switch cuts it off.

Running the unit without enough refrigerant will damage the compressor because the lubricating oil is dissolved in the refrigerant. This is the reason for the low pressure switch cut off--to protect the compressor from damage.

If pressure gets too high, the compressor seals will blow. Thus the reason for the high pressure switch. Too much refrigerant or too much air in the system (due to a leak) will cause high pressures.

If refrigerant level appears to be correct, then suspect trapped air from a leak causing a high pressure cut-off. If refrigerant is low, suspect a leak causing a low pressure cut-off.

Mar 02, 2011 | Volkswagen Jetta Cars & Trucks

3 Answers

99 Ford Superduty Air Conditioner quits working after 10-15 min.


i have an f250 diesel. Same thing, shuts off after about 10 minutes and comes on when it feels like it. Its not the cycling switch. I checked the voltage at the compressor clutch and its 12v. I also, made a "new" ground for the compressor. The black wire at the compressor is ground. This didn't do anything, nor did checking the freon. It will also shut off if you have run it for a while, turn the HVAC selector to off and back on. Although it has power at the clutch (compressor) it didn't come back on.. this is weird.. i think. I was sitting there trying to figure it out and used my test like to "nudge" the clutch on the compressor.. gave it a little "push start" and it came on again.. seems it needs a new compressor? I will see what happens this weekend when i try that. Also, the pressure and contamination switches, are open circuits, that closed and predetermined settings, they are not tied into the ground of the compressor, but "looped" thru the circuit.

Jul 27, 2009 | 1999 Ford F150 Regular Cab

1 Answer

A/C compressor works intermittently


Hello< will try and help you.Try replacing the low pressure switch,and the high side compressor cut out switch,look on the low side for the low pressure switch(large line/hose).It will have to wires gong to it.The high side cut out switch will be on the high side line/hose,or in the back of compressor.If this doesn`t help Have the system pressures checked.If I can help anymore...roniecon@gmail.com

Jul 17, 2009 | 2000 Volkswagen Beetle

2 Answers

2003 1500.......a/c quits


try cleaning condensor and radiator with pressue washer(be careful no to bend fins)may haft to remove grill if they are dirty will cause ecessive high pressure in system triggering high pressure switch thats why compressor shuts down-if it didnt system would blow line or damage compressor-try that if it works keep clean on regular basis!!!Best of Luck To You!!!!

Jul 01, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Air Conditioner works fine early in the morning or in the evening. During the day, when you press the AC button, it will not engage the compressor or condensor fan. Jumpering out the relays when it is...


sounds like your pressure switch is bad.as the temp outside gets hotter the more pressure is built up in your ac so when the pressure gets to high the pressure switch shuts down the system to prevent damage to it.Did u put any more r-134a in to the system if so then the pressure will be to high and the switch is doing as it is supposed to.Thanks for using fixya

Aug 04, 2008 | 1991 Honda Civic

2 Answers

A/C sporadic compressor. Bypassed high and low with paper clip. Pressures good has Freon. Clutch tests OK. Vehicle runs for maybe 10 min or some times 30 then A/C shuts down. Maybe A/C will fire up...


This is just a suggestion but you should check to see if you have a thermostatic control switch in your evaporator this could be the cause if the intermittent problem.The switch is actually used tokeep your ac from freezing up i believe.

Jul 24, 2008 | 1999 GMC Suburban

1 Answer

Air condition


Check the cooling system, particularly the radiator to make sure it is not partially plugged. Additionally, check the radiator fan for proper operation. If the engine temperature is running way above normal, some of the heat is transferred to the air-conditioning condenser, which causes the air-conditioner to lose efficiency. As for your question about a "limiter" switch, there is a high-pressure switch in the air-conditioning system that cuts the compressor out when the pressure gets too high.

May 19, 2008 | Mercury Marquis Cars & Trucks

Not finding what you are looking for?
Hyundai Motor 2002 Elantra Logo

Related Topics:

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...