Question about 1997 Jeep Grand Cherokee

1 Answer

Insrument Panel Lost

It has disappeared before but came back on a while later. This time it has not. The jeep works ok otherwise but is unusable without speedo

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Try a high tech solution...give the top of the dash a good smack with your hand. If the dash works, you will need to remove gauge face and clean the connector contacts.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Noise either from the engine or transmission


check for a loose heat sheild on exhaust system usually on top of catalytic converter....happened to me

Jan 20, 2014 | 1998 Jeep Grand Cherokee

1 Answer

Instrument cluster light wont turn on.


if your speeking of none of the insrument light illuminating, but headlghts work, then it's the headlight switch that's bad,the headlights will go out very soon though, it basiclly stages down, partial burnout starting with insrument panel. not too hard to change though. abt 50 bucks for the switch give or tk a few

Aug 28, 2012 | 2001 GMC Yukon

1 Answer

Radio goes on and off and now insrument cluster come on then all gaugewent to 0


First place to go is the fuse box. Looks like you've got one loose fuse. Remove the fuse for the instrument panel cluster.Inspect both the fuse and the socket it's in. Clean or replace as necessary.

Dec 07, 2011 | 1998 Jeep Grand Cherokee

1 Answer

Where is the fuse located for the insrument panel on a 1997 grand jeep cherokee


Here's another tip when checking fuses. Use a test light with a probe on it. You can check all fuses in the fuse box in about 10 minutes. With key on and light switch on, all fuses should be powered on both ends of the fuse. The little indents on top of fuse, both ends, can be probed with test light. Every fuse should light up the test light on BOTH ENDS of fuse. If both ends don't light, that's a bad fuse.

Nov 17, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Radio on Jeep 1995 Jeep Cherokee does not work. First FM went out, then 2 months later whole radio stopped working. Came back on once out of the blue and then disappeared for good. Time for a new radio....


YUP....new radio time...you can get a good used unit in a scrapyard or a new one of your choice at any audio store. Make sure you get any necessary face plate adapters and a harness adapter to make the job go faster and easier! ( necessary for new unit)

May 28, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Can a front crank shaft seal be replaced without removing the timing cover? 2001 4.7 litre


The answer is no. But if your that far into surgery why don't you replace water pump, timing chain,and cam shaft seal. Otherwise , this could be double the work at a later time when they go.

Feb 21, 2010 | Jeep Grand Cherokee Cars & Trucks

2 Answers

Insrument panel loses power periodically


this is just a loose fuse or connector wiggle the connector of the lighting control module just above you gas pedal under the dash.turn lights on try to kick slightly the module(black metal box).Sometimes you need to open it and re apply heat and solder on the relay terminals fixed on the board.

Feb 01, 2010 | 2006 Ford Crown Victoria

1 Answer

Warning light on ,top right of instument panel,like a gearbox


It is a service engine light. Have someone run a diagonastic test on the jeep to see why the check engine light is on

Mar 21, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...