Question about 1994 Ford Crown Victoria

1 Answer

1994 crown vic power door locs continuously cycle and one power window will not operate. Is this a wiring short?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Some what! the door locks are not easy.it could be the switch and it can also be one of the door lock acturators is stuck in one direction,they do this often on ford.
The window is either the switch or the motor is gone,sometime the motor can be good and the regulator goes bad,the cable assembly that the motor rides with.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 crown vic and the button for my fuel door is broken how can i get it open until i can get it fixed


You have to go into the truck, and on the right side there is a pull cable which will release the fuel door.

Feb 27, 2011 | 1994 Ford Crown Victoria

1 Answer

I have a 1994 crown vic and the button for the fuel door is broken how can i get the door open until i can get it fixed?


There should be a pull cable in the trunk that you can pull to open the gas door, it may be behind the carpet on the wall behind the gas door inside the trunk.

Feb 27, 2011 | 1994 Ford Crown Victoria

3 Answers

On my 2000 ford crown vic. the power door locks work except for the drivers side. sounds like something is rattleing in the door. any ideas on what and how to fix


the power lock in that door may have broke the rod. remove the door panel to inspect its operation and replace the necessary part. hope this helps

Jan 31, 2011 | 2000 Ford Crown Victoria

1 Answer

The passenger side power window on 1988 crown vic will not go up. when you push button on the drivers side or the passenger side it makes no noise at all .


check the wires inside the drivers door ,where they go from the door to the body,slice the rubber cover to see. often they will break from the drivers door being opened and closed so many times.

Sep 05, 2010 | 1988 Ford Crown Victoria

1 Answer

1994 ford crown vic front pass. side power window regulator...


Yes it is. They will need to be drilled out. Thats the best way, some people try to put bolts on, but I dont advise it.

May 12, 2010 | 1994 Ford Crown Victoria

1 Answer

Cant loc the idle air control vavlve located on a 1988 crown vic


attached to the throttle body,looks like an electric motor bolted to a square piece with the corners notched out,with 2 wire connector on the end.

Feb 19, 2010 | 1988 Ford Crown Victoria

1 Answer

94 crown vic how do i find out if car has keyless entry


Easy. Does your Vic have a five number keypad above the driver's side exterior door handle? If so the you got key-less. If not, you do not.

Jun 13, 2009 | 1994 Ford Crown Victoria

3 Answers

94 crown vic driver power window does not work can


The window regulator can be broke. Its made of plastic and they break often.

May 03, 2009 | 1994 Ford Crown Victoria

6 Answers

How to make rear power windows on police interceptor operational


pull the b pillar cover off next to the driver's seat, there will be a connector with 2 red wires mounted to the b pillar right next to the seat belt retractor, find the other connector, and connect them. should operate normally.

Jan 28, 2009 | 2003 Ford Crown Victoria

1 Answer

1997 Crown Vic blows radio fuses


The quickest way to find a short circuit is by putting a bulb in place of the fuse. Anytime the time the bulb lights there is a load. And if the load is a shorted wire the brightness of the bulb will give you a hint. So while you're at it, finding a 'short' is a quicky...keep your eyes on the bulb. gotcha!

Sep 24, 2008 | 1998 Ford Crown Victoria

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5676 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...