Question about 1997 Nissan Maxima

Open Question

I have a 1997 nissan maxima and i need to find parts for diagnostic codes that are poping up po446

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have 2 codes on p0325 p1400 how can i get them off ?


You can go to the nearest auto parts store and they can remove them with a Code Reader unless you have your own.

Aug 17, 2013 | 1997 Nissan Maxima

1 Answer

Engine Light


after any part is changed due to a code it needs to be erased before the car is started erase the codes and go from there

Oct 21, 2012 | 1997 Nissan Maxima

1 Answer

1997 Nissan Maxima vaccum cut valve bypass valve location


its a code for canister purge solenoid this is in the rear of the car near the gas tank on or near a black box shaped part

Aug 29, 2012 | 1997 Nissan Maxima

1 Answer

I have a Nissan Maxima Problem with the Nissan Maxima 1997 Maxima I have a Nissan Maxima 1997 model the tyres size are P205/65R15. My question is Would Kumho 352 with rims diameter "16 fits on them?


If your wheels are 15" (you said they are) you cannot put a 16" tire on those wheels.
If the 16" ones are on wheels you need to physically check for proper clearance and offset so that they don't interfere with suspension or body parts. If the tire height on the new tires is higher than the originals it will put additional stress on the driveline and could cause problems. (it adversely affects the mechanical advantage you get from the differential gears)

Jan 16, 2011 | 1997 Nissan Maxima

2 Answers

How do you reset the service engine light?


Locate the diagnostic connector. On the 1997 Nissan Maxima the connector is located in the OBD2 standardized location under the driver-side dash, slightly to the right of the steering column. With the ignition key in the "OFF" position, plug the connector of the scan tool into the diagnostic connector of the car. Turn the ignition key to the run position but do not start the engine unless instructed to by the scan tool.

Turn the scan tool on and select "Global OBD2" from the main menu. Select "Diagnostic Trouble Codes" from the first sub-menu, and then "Read Trouble Codes" from the second sub-menu. Write down all listed codes and their descriptions before erasing them. This will save time if you must perform additional diagnostics.

Press the back button on the scan tool until the second sub-menu is displayed, and select "Erase Codes" or "Clear Codes," depending on the manufacturer of the scan tool. A message will appear asking you to confirm your desire to erase the codes and other stored data. Select "Yes". The scan tool will alert you when the codes have been erased.

Test drive the vehicle to verify the repair is complete. The 1997 Nissan Maxima on-board computer will run a series of tests on the systems in the vehicle, including emission control devices. To complete these tests you must take two test drives that include a variety of driving conditions, with a 2-minute cool-down between each test drive. If the service engine soon light does not come back on during these two test drives, you have completed the repairs and the reset.

Oct 25, 2010 | 1997 Nissan Maxima

1 Answer

Code p0446 1997 nissan maxima


how did you fix your p0446 code?

Apr 21, 2009 | 1997 Nissan Maxima

2 Answers

1997 toyota camry check engine light on codes are po441,po446


p0446 is an evap code for incorrect purge flow, check the rear vacume switching valve. its above the rear sub frame

Apr 05, 2009 | 1997 Toyota Camry

1 Answer

1997 maxima emission code repair on 400 & 500


P0400 is auxillary emmisions control and P0500 is vehicle speed idle speed control auxiliary inputs.

Mar 02, 2009 | 1997 Nissan Maxima

1 Answer

Auto Diagnostic Trouble Code


cORRECT. tHIS CODE DOES DEALs With emmissions. P1400 deals with the EGR valve. In case u are not aware, EGR stands for Exhaust Gas Re-circulation. What really this valve does is that it re-cycles some of the exhaust gases into the cylinder for combustion. The EGR valve might be blocked or has malfunctioned. It is advised that this valve changed or consult with a mechanic who is knowledgeable about this technology. a malfunctioned/dis-abled EGR system will cause the car to fail an emissions test, and may cause the EGR passages in the cylinder head and intake manifold to become blocked with carbon deposits, necessitating extensive engine disassembly for cleaning. So it is advised that u repair this ASAP

Jan 19, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
1997 Nissan Maxima Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...